Larry Meaux Ported Heads
04-08-2008 | 03:04 PM
#1
Larry Meaux Ported Heads Stage III 6.0 LS1 Race Heads By Larry Meaux
These started out as a 317 6.0 LQ9 casting. They were cnc ported by Precision Race Components. Larry disessembled the heads and completely redesigned the intake and exhaust runners and shaped the combustion chamber. These were on my 408 and are set up for a 4.030” bore. Here is a list of the components installed and included with this awesome set of heads.
-Patriot Gold Dual Springs (.650” Lift)
-Ferrea 2.080” Intake Valves
-Ferrea 1.60” Exhaust Valves
-3 Angle Competition Valve Job
-63cc Combustion Chamber
These heads sustained a small amount of damage from a piston that came apart, but have been milled and are ready to go. You can see some of the damage left, but they have been pressure tested, cleaned, and freshly milled only for cleanup and are READY TO GO! Here are the flow numbers from Meaux’s flow bench.
Flow Numbers
In EX
.200 134.0 117.4
.300 211.9 171.6
.400 258.0 216.0
.450 278.3
.500 285.7 231.4
.550 292.6
.600 296.1 238.0
.650 298.4
.700 302.0 241.2
These heads will be awesome for a full out for 370+ Cubic Inch Naturally Aspirated, Nitrous, or Forced Induction setup. PM me with any questions and I will try to answer them as best I can. I have WELL over $2,800 in these heads and am sacrificing them at $1,200 SHIPPED. I had these posted before, however I have had them disassembled, pressure tested, new valve job, cleaned (bead blasted), milled (for cleanup only), and reassembled. Like stated, these heads are READY TO GO!
Everyone knows Larry's reputation for some bad heads. Futral has used Meaux for years and some of the fastest cars on tech have been powered by Meaux Racing Heads.
Originally price at $1,625 Shipped, now priced at $1,200 Shipped.
These started out as a 317 6.0 LQ9 casting. They were cnc ported by Precision Race Components. Larry disessembled the heads and completely redesigned the intake and exhaust runners and shaped the combustion chamber. These were on my 408 and are set up for a 4.030” bore. Here is a list of the components installed and included with this awesome set of heads.
-Patriot Gold Dual Springs (.650” Lift)
-Ferrea 2.080” Intake Valves
-Ferrea 1.60” Exhaust Valves
-3 Angle Competition Valve Job
-63cc Combustion Chamber
These heads sustained a small amount of damage from a piston that came apart, but have been milled and are ready to go. You can see some of the damage left, but they have been pressure tested, cleaned, and freshly milled only for cleanup and are READY TO GO! Here are the flow numbers from Meaux’s flow bench.
Flow Numbers
In EX
.200 134.0 117.4
.300 211.9 171.6
.400 258.0 216.0
.450 278.3
.500 285.7 231.4
.550 292.6
.600 296.1 238.0
.650 298.4
.700 302.0 241.2
These heads will be awesome for a full out for 370+ Cubic Inch Naturally Aspirated, Nitrous, or Forced Induction setup. PM me with any questions and I will try to answer them as best I can. I have WELL over $2,800 in these heads and am sacrificing them at $1,200 SHIPPED. I had these posted before, however I have had them disassembled, pressure tested, new valve job, cleaned (bead blasted), milled (for cleanup only), and reassembled. Like stated, these heads are READY TO GO!
Everyone knows Larry's reputation for some bad heads. Futral has used Meaux for years and some of the fastest cars on tech have been powered by Meaux Racing Heads.
Originally price at $1,625 Shipped, now priced at $1,200 Shipped.
Last edited by Bhogan909; 10-25-2009 at 10:56 AM. Reason: Lowered price from $1,625 to $1,200.
04-12-2008 | 07:23 PM
#4
These are on eBay now. They end tomorrow evening. Here's the link.
http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=011
http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=011
Trending Topics
11-15-2009 | 09:43 AM
#13
The heads were pressure tested and the valves lapped back perfect. The valve never touched the piston. The piston broke into really small pieces from the corner of the top ringland and never touched the head or valve.
