Wiseco forged nitrous pistons, part #K394A3, 8cc dish, include wrist pins and spirolocks. About 6k miles on them and NEVER sprayed nitrous $400 obo shipped





7 Eagle H-beam rods, 6.125", accept standard .927" wrist pin. Part#CRS6125B3D Include ARP rod bolts. There are only 7 because my motor hydrolocked and busted a rod. These have been checked by my machine shop and are good to go. I spoke to Eagle and all you have to do is call them with the weight of one rod and they will send you one the same weight, it will cost approx $70. Also about 6k miles on these. $300 shipped

 

spiro-locks are not reuseable according to wiseco and now new rings are needed at 120+ dollars. If they dont sell for awhile and you come down on the price, i will be interested

which rod bolts are on the rods? it will be stamed on the head..8740....2000...or l19

 

Ok, i didn't realize that about the spirolocks, thanks. And of course you'd need new rings, but they aren't included when you buy new pistons either, so im not going to come down for that. I'll go to $350 because of the spirolocks.

The rod bolts are 8740

 

if these are for a 3.622 stroke i will take them

I HAVE PAYPAL READY!!!!

 

Sorry, they are for a 4.000" stroke

 

ahhh.you are right about the rings not coming with them...i was mistaken.

 

bump...

 

bump, these are OBO

 

so these can or can not be used with stock rods?

 

was this in a 408..and what was ur compression. im interested in doing a budget boost motor

 

yeah they were in a 408, CR was 11.3 with 64cc heads

 

I'd be interested but the CR is alittle high for my setup...

 

Pistons are sold