Lots of go fast LS1/4th gen parts!!!
08-25-2008, 04:12 PM
#1
10 Second Club
Thread Starter
iTrader: (55)
Join Date: Apr 2004
Location: Fountain Inn, SC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Lots of go fast LS1/4th gen parts!!! ok I'm changing directions of what I'm going to do with the TA. so here are the beginning of same parts I'm selling off. There will be more added through the week. will ship everything but wheels and tires. shipping and paypal fees not included.
Fast 90/90 intake and TB w/ gaskets and bolts. $1000
Comp Cams 1.8 LS shaft mounts $750
Spohn #405 chrome moly long tube torque arm w/loop some scraping from lowered car on mount. will fit stock 10 bolt or 9" mount bought off board member and never used $450
Nasty performance Sheetmetal LS valve covers w/gaskets and bolts A little dirty(I will try to clean up and get better pic) some minor scratches.$300
Nitrous Daves sheetmetal elbow. some minor scratches. will clear cowl. bought off board member and never used $300
NEW Speed inc. LS1 fuel rails w/ upgrade -8 fittings and crossover.Bought off board member and never used sold
New tan t-top shades. Never used still has new velcro tabs. $75
Centerline telstars. 15x8 w/rim screws w/ MT 26x10 stiff sidewall slicks and 15x4 w/ Moroso DS2 front runners. this combo cost$1250 new. Selling for $850 *will post pics later in the week*
LS1 scanmaster sold
TCI LS1 flexplate billet steel sfi $175
CNC'ed Jounce bumpers w/replacable poly bumpers have 5 sets made up will require longer bolts(now included) and possible slight bending of lip(arrow in pic) to bolt up. $52 shipped per pair. only 2 sets left!
Lots more to come later in the week!
Fast 90/90 intake and TB w/ gaskets and bolts. $1000
Comp Cams 1.8 LS shaft mounts $750
Spohn #405 chrome moly long tube torque arm w/loop some scraping from lowered car on mount. will fit stock 10 bolt or 9" mount bought off board member and never used $450
Nasty performance Sheetmetal LS valve covers w/gaskets and bolts A little dirty(I will try to clean up and get better pic) some minor scratches.$300
Nitrous Daves sheetmetal elbow. some minor scratches. will clear cowl. bought off board member and never used $300
NEW Speed inc. LS1 fuel rails w/ upgrade -8 fittings and crossover.Bought off board member and never used sold
New tan t-top shades. Never used still has new velcro tabs. $75
Centerline telstars. 15x8 w/rim screws w/ MT 26x10 stiff sidewall slicks and 15x4 w/ Moroso DS2 front runners. this combo cost$1250 new. Selling for $850 *will post pics later in the week*
LS1 scanmaster sold
TCI LS1 flexplate billet steel sfi $175
CNC'ed Jounce bumpers w/replacable poly bumpers have 5 sets made up will require longer bolts(now included) and possible slight bending of lip(arrow in pic) to bolt up. $52 shipped per pair. only 2 sets left!
Lots more to come later in the week!
Last edited by Badmire68; 09-02-2008 at 01:52 PM.
08-25-2008, 04:36 PM
#3
10 Second Club
Thread Starter
iTrader: (55)
Join Date: Apr 2004
Location: Fountain Inn, SC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
i will get the pics of the telstars later in the week when I can get them cleaned up.
I have owned the scanmaster about 2 years and I think it was hooked up in the car for about 3 trips to the track. If you want to know more features try Thunder racings website undeer ls1 computer/tuning section.
08-25-2008, 07:04 PM
#5
10 Second Club
Thread Starter
iTrader: (55)
Join Date: Apr 2004
Location: Fountain Inn, SC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
.. 
08-28-2008, 11:25 PM
#14
its ok, shipping my friend, shipping.. BTW the ******* comment was casual. im not mad.. could honestly care less..
i have the money, i dont care we can have a bid war all night.. i need an intake.. and im going to buy one, probably his.. unless you wanna spend as much money as you could buy a 92/92 for.. in that case ill buy someone elses 90/90..
i have the money, i dont care we can have a bid war all night.. i need an intake.. and im going to buy one, probably his.. unless you wanna spend as much money as you could buy a 92/92 for.. in that case ill buy someone elses 90/90..
08-29-2008, 02:31 PM
#16
10 Second Club
Thread Starter
iTrader: (55)
Join Date: Apr 2004
Location: Fountain Inn, SC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
I won't take $800 or $850 for the intake either way.
Bump stops. Best i can do is $50 shipped on any set. I will check with energy suspension and see if they make it in red. if they do it is possible I can get you a set w/red ones.
Bump stops. Best i can do is $50 shipped on any set. I will check with energy suspension and see if they make it in red. if they do it is possible I can get you a set w/red ones.
08-31-2008, 10:42 PM
#20
10 Second Club
Thread Starter
iTrader: (55)
Join Date: Apr 2004
Location: Fountain Inn, SC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
The first set I cut I basically bent that lip out straight, installed the plate/bumper and took a hammer and tapped it back over. I have relieved these another 1/8" but may still have some interferance. not every car is exactly the same in this area. it is not a big deal to bend it or you could actually cut it off if you wanted to. it does not affect anything on the car.