what kinda numbers are you guys getting with the cc503
05-19-2009, 10:25 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2007
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
what kinda numbers are you guys getting with the cc503 guys i just got a cc503 cam for the TA today, and im curious on what type of numbers you guys are putting down with it
consisting mods
bbk underdrives
slp cai
bbk52mm tb
pacesetter lts
free mods
ported heads i done myself
1.6 roller rockers
soon to install the cam and new behive valve springs
just curious on what your guys dyno numbers are this car has 150xxx miles with a 6spd im just wondering what type of numbers i should be looking 4 and what is some of your guys track times, and dyno numbers
consisting mods
bbk underdrives
slp cai
bbk52mm tb
pacesetter lts
free mods
ported heads i done myself
1.6 roller rockers
soon to install the cam and new behive valve springs
just curious on what your guys dyno numbers are this car has 150xxx miles with a 6spd im just wondering what type of numbers i should be looking 4 and what is some of your guys track times, and dyno numbers
05-19-2009, 11:13 PM
#5
How much porting did you do on the heads? I've seen where cam-only cars were making in the 350rwhp area, with the cc503. With some porting, I don't see why it shouldn't be able to make 370rwhp+. It all depends on the porting job though, and the dyno.
05-20-2009, 12:06 AM
#6
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2007
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
yeah that is what i was thinking i worked them for about 2 days in the valve bowels chambers, it is prolly one of the best free hand sets ive done, i should of got them put on the flowbench but i was in a hurry to get them back on to drive the car, it runs a 13.309 at 110mph with a 2.02 60ft with the mods that are done to it now, i im pushing for mid 12's without nitrous and hopefully high 11s with a 100shot
05-20-2009, 12:54 AM
#7
mine made 371 rwhp and 374 tq and its a stock headed 355. I havent made it to a 1/4 mile but it went 7.7 at 93 on motor and 7.2 at 102 on a 125 shot. I love this cam for a stock headed car!
Trending Topics
05-20-2009, 04:29 PM
#8
12 Second Club
Join Date: Feb 2006
Location: Catlettsburg, Ky
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
I've also went 12.43@114 and 8.19@90 on a 1.98 60' on 17" street tires.
he'll take care of you for sure. when are you planning on going out there for the tune? I might run out just to see what's going on, I've gotta go out there and service his farm equipment before hay season hits..
05-21-2009, 01:29 AM
#12
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2007
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
with a VERY similar setup, I put down 355/352 on phil's dyno.
I've also went 12.43@114 and 8.19@90 on a 1.98 60' on 17" street tires.
he'll take care of you for sure. when are you planning on going out there for the tune? I might run out just to see what's going on, I've gotta go out there and service his farm equipment before hay season hits..
I've also went 12.43@114 and 8.19@90 on a 1.98 60' on 17" street tires.
he'll take care of you for sure. when are you planning on going out there for the tune? I might run out just to see what's going on, I've gotta go out there and service his farm equipment before hay season hits..
im just hoping for some good times yea you will have to stop by there and see whats going on its always nice to meet new people from ky that like to race
