LSwhat???

My buddy just got a LT1 formula A4.
Hes got a Lingenfelter cai, hooker headers, to 3" headerback exhuast no cats or mufflers straight through. he also has a manual cutouts where u have to take it out manually. Its got a B&M shiftkit and a 4.11 Richmond Gear what do you guys think 1/4 mile time will be?

Think it will beat a 02 LS1 a4 lid cutout LS6 intake and 3500 stahl/stall however you spell it lol

ss.slp.ls1

iTrader: (36)

Hooker LT headers?
You have a stall, he has gears. Power wise I'd say you guys are close (assuming he has LT's and not shorties). It will be interesting...

duh

iTrader: (16)

It'll probably give your LS1 a run for its money...Similar car with less gear and a stall was at 13.5 with 105K onit, so it'll probably be close. I'd say LS will still pull the top end but LT will definitely get you outta the hole, depending on tires of course

michaelz28lt1

I think both cars should run about a 13 flat in the 1/4 mile.

LSwhat???

i think there just mid length headers, not sure though havent gotten under that car just was told about it. imma see it thursday night

LSwhat???

the LS1 a4 runs a 12.9 wih no launch at all 2.1 60ft. lol.
the LT1 a4 is fast but has bald nitto 555r's no stall 4.11 gear and exhaust. so idk what do you guys think?

LS1- 3500 fti stall, slp lid, cutouts, and LS6 intake,
LT1- 4.11 gear, full exhuast with cutout, shift kit, and cai

stock to stock who will win?

michaelz28lt1

Stock to stock the LS1 would win if both drivers are equal to one an other. I think it would be a very tight race with maybe the LS1 winning by a nose but like they say on that gay a$$ show pinks, "its to close to call".

LSwhat???

yea yea... that gay show lol. some races are tight but when they get them hondas and jap cars involves unless its a supra or something cool lol. but back to the post

the lt1 guy just got the car so idk. the camaro cant launch no offense ryonyanko but its cuz of the tires. hopefully shell have et streets for the race but idk yet.

ryonyanko

iTrader: (1)

what if i have et streets huh? yeah it pretty much runs 13 flat i bet all you guys are right its a drivers race... sadly hes got more exp under his belt than i've ever had but its a new car for him. i expect to be pretty close too if i actually launch it lol hawww i can't launch no offense taken LOL i have the 3.23 gearing

my car would run sooo much better with a better driver or traction or both i'm positive lol

LSwhat???

well technically his dad has exp lol. hes used to a gtp so yea. big jump from that car to this hes a lil intimadated by it. bald nitto 555rs and 4.11 gear and full exhaust. i thought the stock a4 lt1's do like a 13.9-14.2 depending on driver. and the ls1 a4 does 13.1-13.5 or something like that??? i mean i could be way off idk.

94maro

I have a question if he has stright pipes why does he have a cut out??

LSwhat???

about the cutout idk dont ask. he bought the car like that. he was also told it was an lt4 with a hot cam 2800 stall. it has none of that so like idk

michaelz28lt1

Well an A4 with 4.11s on et streets stock 10 bolt, do you see where I'm going. It might hold up for a little bit but its a disaster waiting to happen. With the ET streets and if everything holds together than the LS1 will be playing catch up for sure and the LS1 would probably start reeling the LT1 in on the big end but he might run out of real estate before he pulls back even.

ryonyanko

iTrader: (1)

well its the ls on et streets possibly, not the lt

michaelz28lt1

I would give the nod to the LS1 then. You should be able to run a 12.7 with et streets and the LT1 doesn't have that in it.

ryonyanko

iTrader: (1)

ah i see.. well it all depends on that then... i'll be taking out a little weight from the car too. rear seats and the spare tire + jack and all the **** i always leave in my car and oh !passengers this time jonny LOL

LSwhat???

hey hey i only weigh next to nothing lol but yea. lol ill stand on the side no problem. if you really want me to race your car i dont have a problem with that lol, unless u do. if i have my dads tires on your car ill stall that bitch to 3k and pull lengths on him ahhaha.

Smokinlt1

If I read your post correctly he's an a4 with 4.11 gears. U should be beat him everytime in the qtr cause his tranny will be shifting into O/D before the 1/4 mark. Or if it doesn't shift into O/D then he's spinning a stock motor well beyond where it makes its power. A head/cam motor with ARP bolted bottom end would probably like the 4.11s. I personally think thats too much gear unless running 28inch tires. Just my 2 cents.

LSwhat???

yes hes an a4 with 4.11 no stall shift kit
shes a a4 with 3.23 3500 stall no shift kit
i think hes gonna blow the motor cuz it wines out the gears. it dont shift outta 3rd till like 110mph. i dont think thats adding up somewhere somehow. if anything he should be outta 3rd at like what 90? i mean this guy told him alot about the car that isnt true at all. He said LT4 swap 2800 stall and the ws6 package suspension. the only think i see under the car is a crossmemember for the rear end. lol and a painted rear end haha. there is no LT4 setup no stall at all besides stock the tires break loose at 1200rpm lol. This guy did get the shift kit correct. and maybe the gear.

my dad is running a 4.11 gear on a 275/55/16 mickey thompson et street. his motor is kinda built and i know the trannny and rearend are. TH400 3500-4000 stall and a strange 9" rear end 37spline axles. but yea anyway he shifts his at 6000 rpms and gets outta 3rd at like 90 or so. you think the guy could of lied about the gear ratio too?

Puck

iTrader: (17)

A4s are dogs without stalls. The stalled LS1 should eat him alive!

Why in the world is it only getting 2.1 60's with a 3500 stall? Is it on bald mini-van tires ?