Fuel Pouring Out Of Coolant Crossover Tube!!!!
#43
11 Second Club
iTrader: (17)
ok you can test your coil if you can find the ohm reading it should be at when its operating correctly..kinda of need mitchell or a GM write up... now an opti is really the same as any distributor but flat and thin if you want pull yours apart youll need an inverted torques bit i think 6 or 8 in size of the points in side are worn out then you need a cap and rotor as for ohm reading on coil i have no idea
#44
TECH Apprentice
Thread Starter
iTrader: (44)
Join Date: Jan 2009
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Problem Fixed!!!!!!!!!!!!!!!
Got a buddy to put a scanner on it and Engine Coolant Temp sensor was reading -40F yes negative 40 degrees. so the computer was dumping gas in. replaced it and now im firing everytime.i cant believe a $11 sensor been causing me so much headache.i still have a few issues to work out but at least i can start it to troubleshoot it now.
Thanks guys to all those who helped!!!!!
Got a buddy to put a scanner on it and Engine Coolant Temp sensor was reading -40F yes negative 40 degrees. so the computer was dumping gas in. replaced it and now im firing everytime.i cant believe a $11 sensor been causing me so much headache.i still have a few issues to work out but at least i can start it to troubleshoot it now.
Thanks guys to all those who helped!!!!!