Lid Conversion On TA Non-Ramair Hood - Pics
#1
Lid Conversion On TA Non-Ramair Hood - Pics
I know there are a hundred threads about this conversion. I don't really have any new information, but most of the pics I have seen are done on Camaro hoods, ram air hoods, or aftermarket hoods. I was never able to find out for sure that this would work with the stock non-ramair TA hood. So I gave it a try and snapped some pics showing what had to be modified. Maybe these will help someone else out.
#2
It fits, but it's tight. When the hood is closed, I swear you can see the SLP applique pushing through. Still got a few things left to tidy up, but it's mostly done. Hope this helps a fellow TA owner who may be thinking about this.
Last edited by dubga; 07-06-2010 at 08:05 AM.
#3
Launching!
iTrader: (5)
Join Date: Feb 2009
Location: Bartlesville,OK
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
IMO it will work so much better on a ram air hood bc u dont have to cut on the frame of the car, probably just trim under the radiator support.
Anyways it looks nice and clean good job!
Anyways it looks nice and clean good job!
#7
Teching In
iTrader: (1)
Join Date: Sep 2009
Location: Gulfport, MS
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
I have been wanting to do this for a while. I have seen countless writeups on the Camaros but not many on Formula's or T/A's with non ram air. I actually like the way my Formula looks with the stock hood and don't want to switch to a Ram Air hood. Thanks for the writeup.
Trending Topics
#8
Feel free to pm me if you have questions.