95 trans am

M6
Shorty headers
Hooker muffler
Street tires
Dome pistons
Crane 503/510 224/230 cam
Stock heads/intake no port work.....
BaLanced bottom end
KN CAI
373 gear
Pump gas
Computer tuned by pcmforless.com

Shifter is giving me problems. Think the plastic cup is broke. Missed 3rd a few times. But best so far....

13.38 @ 106.07

I'm happy.

 

with the MPH that should be close to a 12 car keep at it it will get there!
and change them tired and headers and you will really wake that car up

 

13.29 @ 107. Picked up a little.

 

what was the density altitude when you made those runs? not to bad for street tires, I just think your trap should be 109-110 with a m6 car and those mods... especially with bumped compression.

 

I got no clue. Its real cold though. Ha. Went 13.21 the best for today

 

What were your 60's?

--Alan

 

Looks like 3000-3500' DA
DOME PISTONS

 

Best 60' was 2.110 yeah dome pistons. About 11.5:1 compression

 

if your shifter is worn and sloppy replace that thing ASAP! my old tired & worn hurst stocker played a big role in clapping out my trans according to the builder.

 

Gotcha. Will do.

 

Gotcha. Will do.

 

what track?

 

also have you been disconnecting your front swaybar? that will help w/ the weight transfer

 

MCIR in larue Ohio. No I didn't disconnect it. But I will try next time.probably next year

 

DA was -550, I just looked it up... With that kind of air your car should trap
110+.

 

Only trapped 106.39
2.1109 60'
5.7233 330'
8.6351 660'
85.38 MPH@660'
13.2161 1320'
106.39 MPH@1320'

 

Do you have 1.6 rr's?

I think your down on power a little. It should trap 108-109 at least.

Get a cutout, that will add a decent amount of hp for the $ is costs. Especially since your running the stock exhaust. Next drop the front sway bar, jack&spare, rear seats next. Drop the pressure in the tires to 26psi.

The front sway bar will help out with weight transfer and add to the total weight loss.

with the cutout and weight loss you could lose .2-.3 and gain 1-1.5mph.

 

I think its trapping exactly what it should...

 

I do have 1.6rr's but there not installed yet. There are headers but Just Shorties. I want to get long tubes. But I don't know how long I am keeping this car. I have 4.10s to install also. And a bottle. But I need to get this dialed in first

 

Why is everyone against dome pistons??