a/c delete question

Reply Subscribe

Thread Tools

Search this Thread

Dec 8, 2010 | 04:33 PM

LTXBOI

Thread Starter

Banned

iTrader: (2)

Joined: Mar 2010

Posts: 367

Likes: 0

From: SOCAL1320

a/c delete question

97 z28 want to install delete pully but dont know what belt i need.anybody have a clue

Dec 8, 2010 | 04:50 PM

RamAir95TA

TECH Senior Member

iTrader: (2)

Joined: May 2005

Posts: 9,467

Likes: 8

From: South Jersey

Depends on the pulley you have. The EASIEST thing to do is measure.

Dec 9, 2010 | 01:05 AM

ORedRoc4

Launching!

iTrader: (15)

Joined: Apr 2007

Posts: 247

Likes: 0

From: Clear Lake, Houston, Tx

Go to advanced auto and you can get a 1LE AC delete pulley for about $20 or $30. It bolts right in place of the compressor and you can use the original belt.

Dec 9, 2010 | 09:49 AM

R3DLT1

Launching!

iTrader: (5)

Joined: Feb 2009

Posts: 245

Likes: 0

From: Bartlesville,OK

The stock belt worked fine here.

Dec 9, 2010 | 10:01 AM

quik95lt1

9 Second Club

iTrader: (7)

Joined: Dec 2008

Posts: 4,464

Likes: 12

From: Rhode Island

yep same here when i had the accessory bracket still on i just got an ac delete pully from summit for like $30 IIRC and used the stock belt.....

Dec 9, 2010 | 08:50 PM

LTXBOI

Thread Starter

Banned

iTrader: (2)

Joined: Mar 2010

Posts: 367

Likes: 0

From: SOCAL1320

yeah i have the 1le...thanks guys will install tomorrow...

Dec 11, 2010 | 11:11 AM

Low N Slow

TECH Enthusiast

iTrader: (4)

Joined: Mar 2005

Posts: 546

Likes: 0

From: Stanwood, WA

I used the 1le pulley and had to get a shorter belt. What I found out was GM used 2 different pulleys on the A/C compessor, if you have the smaller pulley on your compressor the belt will be the same length, if your compressor has the bigger pulley you will need a shorter belt. My stock belt was 64.3" and the new belt is 63.5"