PICS of you guys running single plane setups
#21
Intake: Professional Products Super Hurricane $250ish
Elbow: Custom built by a friend
TB: Summit 58mm $249
Fuel rails: Edelbrock (for the Victor E) $75ish
Fuel line adapters : can't remember, but they were $cheap
Work done by my friend to build elbow and machine the intake $300ish he used a 4bbl carb spacer with a vacuum port as the baseplate for the elbow. That way he didn't have to tap a vacuum fitting for the brakes and fuel regulator.
If you look at the thermostat area, you can see that he sawsall'd it off and filled the holes with weld, and then ground them smooth. It saves a little weight and cleans up the area a little bit.
Elbow: Custom built by a friend
TB: Summit 58mm $249
Fuel rails: Edelbrock (for the Victor E) $75ish
Fuel line adapters : can't remember, but they were $cheap
Work done by my friend to build elbow and machine the intake $300ish he used a 4bbl carb spacer with a vacuum port as the baseplate for the elbow. That way he didn't have to tap a vacuum fitting for the brakes and fuel regulator.
If you look at the thermostat area, you can see that he sawsall'd it off and filled the holes with weld, and then ground them smooth. It saves a little weight and cleans up the area a little bit.