95 LT1 TA going LQ9
#344
Thanks He checks out all my car parts when they come in
This is words of Wisdom for sure!!!
Better yet never let your wife add up the receipts Mine wasn't happy
Close but it also has a plastic intake....lol
Thanks Bud
Harwood.... I need to spend some more time lining it up but i have had it on and off so much lately I haven't messed with it...
I cry sometimes....lol
#345
On The Tree
Join Date: Oct 2010
Location: Tupelo, MS
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
#346
Yes I don't see why not... Dose not really sit very high... I cut a hole in the bottom of the radiator support too so it gets air from the bottom from the air dam too...
,,,
UPDATE
Machine shop called today and the block is all done
bored 4.030
Arp Main Studs and align hone
Square Deck just for clean up
Hot tank
Cam Bearings
Magnaflux and polish crank
Full Rotating assembly Balanced...
Now to throw it together and get it in the car!!!
,,,
UPDATE
Machine shop called today and the block is all done
bored 4.030
Arp Main Studs and align hone
Square Deck just for clean up
Hot tank
Cam Bearings
Magnaflux and polish crank
Full Rotating assembly Balanced...
Now to throw it together and get it in the car!!!
#347
Yes I don't see why not... Dose not really sit very high... I cut a hole in the bottom of the radiator support too so it gets air from the bottom from the air dam too...
,,,
UPDATE
Machine shop called today and the block is all done
bored 4.030
Arp Main Studs and align hone
Square Deck just for clean up
Hot tank
Cam Bearings
Magnaflux and polish crank
Full Rotating assembly Balanced...
Now to throw it together and get it in the car!!!
,,,
UPDATE
Machine shop called today and the block is all done
bored 4.030
Arp Main Studs and align hone
Square Deck just for clean up
Hot tank
Cam Bearings
Magnaflux and polish crank
Full Rotating assembly Balanced...
Now to throw it together and get it in the car!!!
You suck at answering messages...
Hurry up and pick up the damn block...
Pick up beer while you're out...
...and food...
Quit stalling and put it together...
Fire it up....
Send video of said start-up...
Then...
Most importantly....
TRACK TIMES!
Now hurry up! Less typing, more wrenching!
#349
UPDATE
You suck at answering messages...
Hurry up and pick up the damn block...
Pick up beer while you're out...
...and food...
Quit stalling and put it together...
Fire it up....
Send video of said start-up...
Then...
Most importantly....
TRACK TIMES!
Now hurry up! Less typing, more wrenching!
You suck at answering messages...
Hurry up and pick up the damn block...
Pick up beer while you're out...
...and food...
Quit stalling and put it together...
Fire it up....
Send video of said start-up...
Then...
Most importantly....
TRACK TIMES!
Now hurry up! Less typing, more wrenching!
Block is picked up I will post some pics in a little bit!!!
#358
OWN3D BY MY PROF!
iTrader: (176)
Yes I don't see why not... Dose not really sit very high... I cut a hole in the bottom of the radiator support too so it gets air from the bottom from the air dam too...
,,,
UPDATE
Machine shop called today and the block is all done
bored 4.030
Arp Main Studs and align hone
Square Deck just for clean up
Hot tank
Cam Bearings
Magnaflux and polish crank
Full Rotating assembly Balanced...
Now to throw it together and get it in the car!!!
,,,
UPDATE
Machine shop called today and the block is all done
bored 4.030
Arp Main Studs and align hone
Square Deck just for clean up
Hot tank
Cam Bearings
Magnaflux and polish crank
Full Rotating assembly Balanced...
Now to throw it together and get it in the car!!!
#360
Tachyon off of Phillips Highway did all the block work.. Jeff is a pretty good guy
Mike at Automotive Block off of Luna checked the big ends of my rods and mag and polished the crank for me
and Mark Hedricks off of 103rd is awesome but pricey!!
Who do you use?
LOL for sure!! Those individual coils don't sweat water at all!
Thanks Man!!
I may do something clever with it! lol
That is the plan! No corners cut no stone left un turned! Thanks!
Behind the water pump.....DUH!!
Thanks Bud! You need to catch up!
Mike at Automotive Block off of Luna checked the big ends of my rods and mag and polished the crank for me
and Mark Hedricks off of 103rd is awesome but pricey!!
Who do you use?
Thanks Man!!
That is the plan! No corners cut no stone left un turned! Thanks!
Behind the water pump.....DUH!!
Thanks Bud! You need to catch up!