What to expect from 383 LT1
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: North Carolina
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
What to expect from 383 LT1
So Im about to drop off my block for my build.. Going 383 LT1 with 4340 crank, H beams, Mahle -5cc pistons. AFR 210 heads and Nitrous Outlet plate kit 150/200 shot.. Cam is going to be custom grind and unsure of specs at this time. Trying to stay around 11.5:1 CR with long tubes, mac dumps, 4l60e with a 3200 stall and 10 bolt with 3.73's. What kinda of numbers could be expected out of this setup.. Im trying to decide if i want to stick with my LT4 intake and 58mm TB or go with a Vic Jr and fabbed elbow for the 58mm TB.. As far as rwhp what could the range be or track times? I know someone out there has a setup somewhere close to this.. Thanks for the help guys
#3
On The Tree
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: North Carolina
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Thats what i figured.. Im not for sure what it will be.. I told the guy building it i wanted an strong cam for the strip but it would be driven on the street on a weekend basis.. He said hes got it handled so im curious on what this engine will do.lol
#5
On The Tree
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: North Carolina
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
AFR's are untouched no port job.. I got a decent deal is the main reason.. I have plans on a 12 bolt. Just waiting for a deal between now and March, if not then ill order one when i return from this deployment..
#7
On The Tree
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: North Carolina
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Looking at a port job also.. Main reason im waiting is due deciding on the LT4 intake or Vic Intake.. i want to send them both at the same time and ensure their matched well.
Why would you sell them??
Why would you sell them??
Trending Topics
#8
Depending on cam and head flow I'd guess between 430 - 460 rwhp before spray and as for the rear I'd get a 9" or S60 (Dana 60) before I'd get a 12 bolt but that's just my 2 cents.
#11
On The Tree
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: North Carolina
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for that info..I had a 2800 with the stock bottom end, cam only.. I didnt think it had enough for it.. I put down 322/318rwhp and a 8.60 1/8th with that set up before i spun the rod bearings..lol
#12
On The Tree
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: North Carolina
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
So what do you guys think about this cam with my setup??? I had this cam with my bolts ons and turned 318/322rw. How does this compare to the hot cam and other cams people are running these days? Thanks
#14
On The Tree
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: North Carolina
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
So should i use this or go with a new custom grind?