good stroker kit?
Thread Starter
Registered User
Joined: Aug 2011
Posts: 10
Likes: 0
good stroker kit? 350 / 355 SB Chevy 1-PC Real Seal Forged Assemblies - 6.0" Rods
http://www.strokerkits.com/estore.ht...category_id=36
http://www.strokerkits.com/estore.ht...category_id=36
On The Tree
Joined: Mar 2010
Posts: 107
Likes: 0
350 / 355 SB Chevy 1-PC Real Seal Forged Assemblies - 6.0" Rods
http://www.strokerkits.com/estore.ht...category_id=36
http://www.strokerkits.com/estore.ht...category_id=36
The kits in the OP's link I would not call good either.
If I build an engine I would strongly look at the Howard's cranks and rods, they offer American made stuff and are located half an hour away from me in Oshkosh WI. on the SE side of EAA.
I think the "Tracksmart" are Compstar, they say machined by Callies and their "Howard's Pro" series says 100% American and specifies forged here, again machined by Callies.
If I build an engine I would strongly look at the Howard's cranks and rods, they offer American made stuff and are located half an hour away from me in Oshkosh WI. on the SE side of EAA.
I think the "Tracksmart" are Compstar, they say machined by Callies and their "Howard's Pro" series says 100% American and specifies forged here, again machined by Callies.
Thread Starter
Registered User
Joined: Aug 2011
Posts: 10
Likes: 0
hey yall sorry i gave the wrong link lol my bad
http://strokerkits.com/estore.html?p...category_id=36
http://strokerkits.com/estore.html?p...category_id=36
Capricemgr my crank and rods say "100% American Made" now I got my kit about 3-4 years ago so I don't know if they've changed their practices since then but that was the reason I purchased from them in the first place 100% American Made.
Trending Topics
OK I just know on the next step up they stress forged here so I thought since they didn't specify that on the Tracksmart it was possibly forged elsewhere. At any rate the more done here the better. There is a war on manufacturing and physical labor in this country and buying THINGS made here is how we fight it
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
TECH Resident
Joined: Apr 2010
Posts: 787
Likes: 0
From: T E X A S
what brand exactly is everything... and has anyone ever used and of the stuff from that site? I am trying to piece a kit together but it's kinda hard with the horrible afghanistan internet and being 7000 miles from home.
