Turbo LT1 preliminary results
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just for a comparison for you, Mine very similar setup, same turbo, same place. I have LT4 Heads / Intake, slightly bigger cam and @ 11lbs made 643 RWHP and 649 Tq with an M6, going for 15lbs and hopefully surpass my supercharger numbers which was 722 RWHP but this was on the fast gas...Good Luck, Keep on pumping....LT's FTW!!!!
Everyone else - Thanks for the positive words
Jon
#25
TECH Resident
iTrader: (15)
Join Date: Jun 2003
Location: Traverse City, MI
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice torque curve! That must be a blast to drive on the street with the small cam, small stall, and all that torque.
What's the deal with where the pipe increases in size for like 4" then narrows back down again right before the intake elbow? Don't see any wiring for a MAF or anything...
What's the deal with where the pipe increases in size for like 4" then narrows back down again right before the intake elbow? Don't see any wiring for a MAF or anything...
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice torque curve! That must be a blast to drive on the street with the small cam, small stall, and all that torque.
What's the deal with where the pipe increases in size for like 4" then narrows back down again right before the intake elbow? Don't see any wiring for a MAF or anything...
What's the deal with where the pipe increases in size for like 4" then narrows back down again right before the intake elbow? Don't see any wiring for a MAF or anything...