2 step for 94 lt1
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So I did a "search" here and Google and really didn't find the info i need. I want to know if it is possible to install a 2 step system in the 94 camaro's and if it is worth it. I have seen some sick **** with the 2 step
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not sure if it's the two step but I would think to be able and press the gas peddle pushed completely down and keep rpm at your desired limit would help be more consistent. Not saying this is true , I never ran a 2 step just thinking it.
#4
Launching!
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
MSD 6AL2 is what you want. It has two stages of rev limiters, one for burnouts/launches and the other for overall rev control.
I plan on running the programmable 6AL2, which has 3 stages. One for burnout, one for launching on the trans brake and one for overall protection. It also pulls timing instantly when the nitrous is turned on.
Trending Topics
#8
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 2 step, it doesn't make the car faster but it does make it much easier to be consistent and easier when dialing in suspension. You will need a 6AL box, Digital 6, or the new 6AL2. It's activated by a momentary switch or button and when activated changes the ignition rpm limit. When power is supplied it's activated when it's not the normal rpm rev limit is used. I have a momentary button on my shifter that activated the line lock and 2 step. The + for the 2 step from the button has an inline toggle switch. This is so I can turn it off for the burnout and then on for the staging bulbs. My process goes like this: into water box 2 step toggle off, set brake, push button and do burnout, let off button and roll out of the box, 2 step toggle on and into t he pre stage beam, lightly set brakes and push button, use gas and clutch to bump into stage beam, once opponent has staged gas to the floor, 2 step holds rpm to whatever I have it set at, simultaneously release button and clutch to launch!
#10
TECH Enthusiast
Join Date: Aug 2010
Location: New Hampshire
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
#13
TECH Senior Member
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mallory 685 has a 2 step option built in as well...
Heres a vid of it in my car. Helped manual launches on the street a lot....
http://www.youtube.com/watch?v=2VWlM2-jD88
Yes I know its dark. I'm in right lane, boosted 72 is in left lane. You can hear the 2 step...
Heres another:
http://www.youtube.com/watch?v=Xp6NhmzGp5A
Heres a vid of it in my car. Helped manual launches on the street a lot....
http://www.youtube.com/watch?v=2VWlM2-jD88
Yes I know its dark. I'm in right lane, boosted 72 is in left lane. You can hear the 2 step...
Heres another:
http://www.youtube.com/watch?v=Xp6NhmzGp5A
#14
TECH Enthusiast
Join Date: Oct 2011
Location: Apopka FL
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts