396ci LT1 - Dyno Videos and Graph
#1
396ci LT1 - Dyno Videos and Graph
Well, we had a mad thrash to get the car ready for the dyno, and even had to push my slot back an hour just to get some final tweaks made. As you can see, we didn't have a chance to get the front end back together yet.
Quick overview of the setup:
-396ci LT1 - AI 200cc heads, AI ported LT1 intake manifold, 25X26X .6XX lift on a 106*
-TH400 trans, 5400 stall 8" converter, mechanical diode
-9" rear, 35 spline axles, 4.56 gears, 28" tall M/T ET Street Radials
-We started off running to 7,000 RPM, but ended up bumping the rev limiter to 7,200 because she just kept wanting more
Factoring in the drivetrain loss with the huge converter and TH400, I'm very happy with the numbers. It puts us close to the 600HP flywheel number we were looking for. Remember, this car is set up for the 1/4 mile, and should be a killer performer on the strip.
The car ran insanely consistent and impressed all in attendance. Bryan Herter was great to work with and has high expectations for this setup as well! Can't wait for track day!
We made 4 runs. I only uploaded the video of run #4 below, but can upload more upon request.
http://youtu.be/bs8h02KvYVI
Quick overview of the setup:
-396ci LT1 - AI 200cc heads, AI ported LT1 intake manifold, 25X26X .6XX lift on a 106*
-TH400 trans, 5400 stall 8" converter, mechanical diode
-9" rear, 35 spline axles, 4.56 gears, 28" tall M/T ET Street Radials
-We started off running to 7,000 RPM, but ended up bumping the rev limiter to 7,200 because she just kept wanting more
Factoring in the drivetrain loss with the huge converter and TH400, I'm very happy with the numbers. It puts us close to the 600HP flywheel number we were looking for. Remember, this car is set up for the 1/4 mile, and should be a killer performer on the strip.
The car ran insanely consistent and impressed all in attendance. Bryan Herter was great to work with and has high expectations for this setup as well! Can't wait for track day!
We made 4 runs. I only uploaded the video of run #4 below, but can upload more upon request.
http://youtu.be/bs8h02KvYVI
Last edited by 94Z28rag; 04-09-2012 at 08:10 AM. Reason: added info