How much power can a set of max ported heads support? So much porting they had to have epoxy or something to hold things together.

Looking at a rear mount with like 20psi!

It also have a edelbrock intake

The cam is like a 224/224 or something odd

 

Taking every last bit of metal out of the head isn't going to be what you want to do.

But stock heads with the right work have supported 530+rwhp N/A through a stalled auto and a 9". So I'm guessing with a lighter rear end and a T56 you could probably get 550-600rwhp out of a set of stock ported heads N/A if you really pushed it. With boost, who knows. You could get quite a bit of power.

 

Oh, thats like nothing, I will be beat by stock LS1s

So even at 20psi I will only get 500hp? Guess I am gonna swap in a 5.3

 

What are you talking about?

 

Flat black said 550rwhp na. With a 20lbs of boost you could be over 700rwhp. A good stock ported head will support 80% of most builds. A rear mount and 224 cam wont come close to maxing them out.

 

Also never new stock ls1 out run 550rwhp cars.

 

I sense trolling...

 

Man-crush, maybe???

 

Is the turbo ported?

 

Its shownomercy and sweetbmx rider there messing around. Both of them know LT1s fairly well.

Im still waiting to see this epic race between both of them.

 

how about an honest answer for the newbs.
We have seen over 1000rwhp from the Advanced Induction 200cc ported stock heads on ForcedInductions.com f-body with a 355.

 

So I don't need to run the edelbrock LT4 heads to make power??

Some mod did that, dunno why

So if these are LE heads, I can make more than 1000rwhp?

 

 

 

Its part of your rehabilitation since you must have made a provocative post or pissed a mod off. At least said mod did not force your avatar to show a scantally clad Richard Simmons wearing a fig-leaf.

Ask SS RRR how to get back in the mods good graces. Umm.....scratch that thought.

 

Word of advice. Do not make someone higher in the f-body bro food chain cry.

 

lol