01-02 Express Van PCM in a 94 Camaro
#22
11 Second Club
Thread Starter
Ok so I got the 96' PCM and the odb2 ALDL pig tail. I know I have to get a odb2 knock sensor, but what do I have to do in order for the ALDL to function properly? Ed? Shbox? Anyone?
Last edited by NewOrleansLT1; 01-06-2014 at 03:09 PM.
#23
11 Second Club
Thread Starter
Where is the class 2 data wire located and how does it look?
**Edit** I found it. It's in the Blue connector on the PCM PIN number 7...
**Edit** I found it. It's in the Blue connector on the PCM PIN number 7...
Last edited by NewOrleansLT1; 01-06-2014 at 05:56 PM.
#24
9-Second Club
iTrader: (1)
My '96 factory shop manual is loaned out. Have a call into him, no response yet. Glad you found it. My '95 test mule had that wire from the PCM, to the connector inside the car. Just not the inside harness. I'm guessing the '94 may not have it. If you have something you have stopped using (AIR or EGR?) you could maybe rob that wire, move it to the needed position in the PCM connector to run it inside.
#25
11 Second Club
Thread Starter
My '96 factory shop manual is loaned out. Have a call into him, no response yet. Glad you found it. My '95 test mule had that wire from the PCM, to the connector inside the car. Just not the inside harness. I'm guessing the '94 may not have it. If you have something you have stopped using (AIR or EGR?) you could maybe rob that wire, move it to the needed position in the PCM connector to run it inside.