LT1 Dyno Archive
08-26-2008, 09:07 AM
#292
TECH Fanatic
iTrader: (6)
Join Date: Dec 2007
Location: chicago,IL
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
323rwhp 338rwtq. Every bolt on except a ewp. Heads and intake gasket matched, valve job, light porting.
Have the graph in email if anyone wants it. I am too stupid to figure out how to post it.
Have the graph in email if anyone wants it. I am too stupid to figure out how to post it.
just wait for all the 
about this one! 
09-09-2008, 04:37 PM
#294
Teching In
Join Date: Sep 2006
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
bone stock
RWHP: 253 RWTQ 305
track: all season tires with little tread left 14.5 (blew 3rd and 4th cluctch pack in tranny, and didn't shift into 3rd or 4th..had to let off, trapped at 93mph) probably could have passed at 14.0-14.2
RWHP: 253 RWTQ 305
track: all season tires with little tread left 14.5 (blew 3rd and 4th cluctch pack in tranny, and didn't shift into 3rd or 4th..had to let off, trapped at 93mph) probably could have passed at 14.0-14.2
09-12-2008, 12:46 AM
#295
Teching In
Join Date: Sep 2008
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
1994 M6 Z28 80k
Bone stock 267hp/298tq
Bone stock 14.40 @ 96.5
Moroso CAI-Magnaflow Catback, 4.10 on 315s. Went 13.60 at 104 w/ 2.06 60ft..
No numbers after said bolt ons.
Now have a set of jet hot LTs and a hooker ORY to put on along with an underdrive and 160 t-stat.
Maybe i'll get new numbers afterwards.
Bone stock 267hp/298tq
Bone stock 14.40 @ 96.5
Moroso CAI-Magnaflow Catback, 4.10 on 315s. Went 13.60 at 104 w/ 2.06 60ft..
No numbers after said bolt ons.
Now have a set of jet hot LTs and a hooker ORY to put on along with an underdrive and 160 t-stat.
Maybe i'll get new numbers afterwards.
10-18-2008, 09:51 PM
#297
On The Tree
Join Date: Mar 2008
Location: Lincoln,NE
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
383 with LT headers 58 tb 220/230 .510/.510 cam 1.6 rockers 30lb injectors cai stock heads portmached tune
lookin through other numbers i only made 340rwhp/372rwtq and that seems low compaired to some of your other numbers i know it needs heads but it still seems low.
lookin through other numbers i only made 340rwhp/372rwtq and that seems low compaired to some of your other numbers i know it needs heads but it still seems low.
10-19-2008, 01:10 AM
#298
TECH Enthusiast
iTrader: (5)
Join Date: May 2004
Location: Tacoma, WA
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
You're making decent torque due to the displacement increase and long tubes. Other than that, the cam you chose is fairly mild, and the stock heads IMO are corking you up enough which is most likely why your hp number is somewhat low. Get those heads ported to support the rest of the engine and I think you'll see a sizeable gain.
10-19-2008, 11:08 PM
#300
TECH Enthusiast
iTrader: (5)
Join Date: May 2004
Location: Tacoma, WA
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
The potential is definitely there with just stock heads, just depends on how much you want to spend on the porting. Quite a few people use http://www.elliottsportworks.com/ with good results. 400+ hp to the wheels with ported stock heads N/A has been accomplished many times. 