Some updated pics of my project
Motor is a half filled LT1 383 w/splayed 4 bolt mains, Lunati Pro series crank, Oliver 6" billet rods, JE n2o pistons, 12:1 compression, secondstreetspeed large solid roller (Over .700 lift), Jesel 1.7 ratio shaft rockers, AFR 227 cc comp ported heads, Edelbrock Victor E single plane manifold, Big Stuff 3 standalone. ATI TH400 with 4000 stall ATI converter, Moser 9" 3.89 gears.... 2 stage nitrous kit 1 on plate, 1 direct port. 83lb/hr siemens injectors, etc, etc, etc....
Our target is 850RWHP on both stages of bottle (200/200). Car weighs 3200 with me in it so traction being good should be good for an 8.90 pass or so...



Trending Topics
The Best V8 Stories One Small Block at Time

Wheelie bars
hope all turns out well for ya







