Pic's of my new heads...
#1
Pic's of my new heads... UPDATE!!!
Finally came in friday.. They're all pro 245rr's going to be converted to Rev. Cooled.. They'll be sitting on a 396...
http://www.streetsleepers.com/stevepics/allpro1.JPG
http://www.streetsleepers.com/stevepics/allpro2.JPG
http://www.streetsleepers.com/stevepics/allpro3.JPG
http://www.streetsleepers.com/stevepics/allpro4.JPG
http://www.streetsleepers.com/stevepics/allpro5.JPG
BTW Don't mind my buddies wife's leg's..
http://www.streetsleepers.com/stevepics/allpro1.JPG
http://www.streetsleepers.com/stevepics/allpro2.JPG
http://www.streetsleepers.com/stevepics/allpro3.JPG
http://www.streetsleepers.com/stevepics/allpro4.JPG
http://www.streetsleepers.com/stevepics/allpro5.JPG
BTW Don't mind my buddies wife's leg's..
Last edited by IllusionalTA; 03-15-2006 at 04:09 PM.
#7
10 Second Club
iTrader: (1)
Join Date: Jan 2003
Location: Chicagoland Area
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by IllusionalTA
They don't yet.. after porting i'm expecting 350ish in the .600 range...
Good luck.
Trending Topics
#8
Originally Posted by IllusionalTA
They don't yet.. after porting i'm expecting 350ish in the .600 range...
#10
Originally Posted by BADHAWK51
Please keep us posted on the flow numbers I'm very curious 350 @ 600 is a high goal.
Good luck.
Good luck.
http://www.ronsportingservice.com/im...lpro-specs.htm
As far as the cam goes.. it's gonna be a solid roller spec's haven't been finalized as of yet till the final cut has been done on the heads.. But it'll be big..
For the **** guy.. Kicked my girl out of the bed.. and the heads get her pillow....
#14
Here's a update.....
Got a email from Dennis At AFD he's doing the conversion and porting.. Did a lil work on the master port and out of the box the heads pulled 256cfm.. lil massaging and they're already upto 342 and still have quite a way's to go... Should have some more info later next week.. After my kidney sell's..
Got a email from Dennis At AFD he's doing the conversion and porting.. Did a lil work on the master port and out of the box the heads pulled 256cfm.. lil massaging and they're already upto 342 and still have quite a way's to go... Should have some more info later next week.. After my kidney sell's..
#18
Tenured Member
iTrader: (3)
Join Date: Nov 2002
Location: Ohio
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I'm using the same heads for the engine I'm building right now. I've just finished the conversion, and I'll be sending them back to All Pro for finish machining and the CNC work sometime next week. Looks like we'll both be making some good power when our projects are completed.
Good luck, and keep us posted.....
Good luck, and keep us posted.....
#19
Originally Posted by Joe Racer
I'm using the same heads for the engine I'm building right now. I've just finished the conversion, and I'll be sending them back to All Pro for finish machining and the CNC work sometime next week. Looks like we'll both be making some good power when our projects are completed.
Good luck, and keep us posted.....
Good luck, and keep us posted.....
#20
9 Second Club
iTrader: (4)
Join Date: Dec 2004
Location: Cali
Posts: 2,607
Likes: 0
Received 0 Likes
on
0 Posts
As far as the cam goes.. it's gonna be a solid roller spec's haven't been finalized as of yet till the final cut has been done on the heads.. But it'll be big
My AFR 227's did like 310cfm and 235 at .650 CNC ported by AFR..... going to be slapped on a serious nitrous motor.... what is the rest of your setup... sounds like a monster like mine.... 06 looks like a good year for some serious builds...
care if you tell me what you paid for em after everything? Porting and reverse cool setup plus cost of castings????