355 Rebuild Dyno numbers
02-06-2006 | 05:43 PM
#1
Thread Starter
On The Tree
Joined: Jan 2006
Posts: 161
Likes: 0
From: Leander, TX
355 Rebuild Dyno numbers So I finally dynoed the LT1 like a week ago at Danny's shop(Lethal Performance in SA). I put down 380 RWHP and 353 RWTQ... I have the video of the pull on my comp if anybody wants to host it. I was really happy with the numbers being that I just have a little bitty ole hotcam in the car. Next step is a BIGGER CAM :-D Anyways somebody let me know if they wanna host the vid. Also it only has like 2000 miles on it... Will it get stronger in the next couple thousand miles?? If so, how much?
Chris
Chris
02-06-2006 | 06:30 PM
#3
Thread Starter
On The Tree
Joined: Jan 2006
Posts: 161
Likes: 0
From: Leander, TX
Originally Posted by blkchevyz
like i said on the other board, thats damn impressive with the hot cam
now you just need to give futral a call and get one of there custom cams.
now you just need to give futral a call and get one of there custom cams.
Trending Topics
02-07-2006 | 09:09 AM
#9
TECH Fanatic
Joined: Oct 2003
Posts: 1,101
Likes: 0
Originally Posted by Cammed95Z28
You really think they can get me a cam that will out perform the GM847??
02-07-2006 | 06:56 PM
#11
Thread Starter
On The Tree
Joined: Jan 2006
Posts: 161
Likes: 0
From: Leander, TX
02-14-2006 | 01:35 PM
#15
Not bad. what heads are you running? I have a 355 with hotcam and stock heads. I put down 346 rwhp and 355 rwtq. I know there is more in my motor, but Im getting around 62,000 counts of knock at WOT. It has been there since I built the motor over a year ago. Still got a 12.759 @ 111.00 spinning 1-3.
02-15-2006 | 01:07 AM
#18
Thread Starter
On The Tree
Joined: Jan 2006
Posts: 161
Likes: 0
From: Leander, TX
Exhaust is AS&M mids and Ypipe to a custom catless 3" with an 18" bullit muffler dumped... Yeah the heads flow pretty dang well... I will post the flow numbers when I get back to my computer tomorrow if you are interested...
02-15-2006 | 04:36 PM
#20
Originally Posted by Cammed95Z28
Local shop called "Port Pros"... They did a really good job and I would recommend them to anybody in the Central Texas Area... 
in Austin? They sponsor LS1tech and do bad *** head, the numbers are good for that little hot cam. But with a bigger custom cam that puppy could make close to 400.