high performance oil pump
#3
TECH Fanatic
iTrader: (2)
Join Date: Nov 2006
Location: Aztec, NM
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Don't go high volume. You don't need it and will only lose HP from trying to turn the larger gear. If you feel that you need more, then just put a high pressure spring into it. But with the roller cam and rockers you don't need but a little bit of oil to lube things properly. Windage slows the motor down and HP is robbed.
#4
TECH Fanatic
iTrader: (25)
Join Date: May 2006
Location: Canton, OH
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I went with the melling m55a it is a high pressure pump already has the spring in it. Its about $29 from cnc-motorsports and you can get the driver shaft for about $8 which is well worth it.
#5
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Raleigh, NC
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 95FbFormula
I went with the melling m55a it is a high pressure pump already has the spring in it. Its about $29 from cnc-motorsports and you can get the driver shaft for about $8 which is well worth it.
Trending Topics
#10
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Raleigh, NC
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That doesn't explain anything. You can have higher pressure with the same amount of flow(volume), all you do is make the diameter (cross sectional area) smaller. Therefore, you don't lose any hp. Fluid dynamics.
#11
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Raleigh, NC
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by fergymoto
More drag...
#12
TECH Addict
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by seawolf06
That doesn't explain anything. You can have higher pressure with the same amount of flow(volume), all you do is make the diameter (cross sectional area) smaller. Therefore, you don't lose any hp. Fluid dynamics.
#17
TECH Fanatic
iTrader: (2)
Join Date: Nov 2006
Location: Aztec, NM
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The high pressure pump will cause more windage due to more oil being sprayed all over the other engine parts. Windage will kill HP. Look at some of the motors being built for the engine masters challenge in Popular Hot Rodding. All of them are controling were the oil returns to the pan to minimize windage. I highly recommend staying with a stock oil pump, it is more than enough.
#18
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Raleigh, NC
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just read that the M55A pump with the white spring acts exactly like a stock pump until about 55psi. Then it provides a higher pressure than stock. Don't stock LT1's have a windage tray?
#19
TECH Fanatic
iTrader: (2)
Join Date: Nov 2006
Location: Aztec, NM
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes but it isn't that great. It helps, but it is nothing like a aftermarket oil pan for oil control and effectiveness. If you can go to Popular Hot Rodding's web site and read about some of the Engine Masters Challenge motors. They show you the extensive amount of work done to control were the oil returns to the oil pan and how they keep the oil from splashing up onto the rotating assembly. And that is with useing aftermarket oil pans.