1badzee

iTrader: (12)

I got it as well as two other of my friends and they are fine... i dont get why people are saying their ****..


and mister Shepherd you have one badass car

96LT1355Z28

iTrader: (2)

I've got the Accel Extreme 9000's, no problems and not universal fit (no making the ends!) Less than $100 from Summit.

leadfoot4

iTrader: (1)

I've said it before, and I'll say it again....Moroso BlueMax wires for me, no problems at all!

Toronto_LT1

iTrader: (-1)

taylor spiro pro wires here,they work great for me.

6covered

I installed a MSD Billet Opti along with 8.2mm Taylors and new plugs last week. Hot Rod's been running sweet. Haven't had any problem nor can I complain.

I'll keep an eye on the wires however after hearing everyones comments.

Jon

Untouchable9262

taylor wires garbage, put brand new ones in and same thing, stock or msd works for me.

porksoda

iTrader: (39)

I have the OTVC kit from Thunder and my car does not miss a beat! I also have the dreaded MSD opti that everyone talks bad about and MSD coil. So I guess all my ignition parts suck but my car loves em!

texas94z

I guess it's hit or miss with Taylor wires. I will never buy a Taylor product again.

JoeliusZ28

iTrader: (2)

Well I just replaced an opti because i was stupid enough to trust taylor wires.

These things are going in the trash as soon as i get my new ones. Does anyone know if stock length Delco wires will fit going OTVC? even if i have to coil them up? Not dealing with this bullshit anymore.

BTC

I bought MSD bulk wire, and all of their components, and made my own OTVC wires just because I wanted black wires. It wasn't too difficult.

There seemed to be way too much negative info out there regarding Taylor wires to seriously consider the Thunder Racing kit.

19mike84

i have heard a bunch of people having problems with taylor wires. i have the spiro pros and so does a friend of mine and we have no problems. i also have lt's

texas94z

Update.....

I just installed some o'reillys super cheap brand wires and my z28 runs prefectly. So case closed.

BOLO

iTrader: (40)

This is another hit or miss product, as in the Comp 875r lifters. I'm presently using both of these. I 've had my Comp 875r lifters since 2005 with no issues whatsoever and have had the Taylor SpiroPro wires for almost 8yrs now with no arcing or miss. IMO, both are great products.

rdlt1

I have Taylors the car runs great, but I will check, heck maybe I just think it's running great??

leadfoot4

iTrader: (1)

I agree.... I have the Comp lifters, have about 8-10,000 miles on them. So far, so good. Wires? that's another story......

JoeliusZ28

iTrader: (2)

- bumping this to the top -

people running the Accel 9000s, where did you get them? I need a set that is cut to fit to replace my OTVC taylors. The summit kits only seem to include 8 ends, or only come with one type of connector.

1badzee

iTrader: (12)

I take back what i said. Mine are arcing (1 week later). FAIL

JoeliusZ28

iTrader: (2)

mine were bad from the minute i started the car. I zip-tied them as best I could and drove it for year like that, situation never changed.

ZeeTwentyFate

iTrader: (19)

havent had any problems but i WILL be making a new set soon FYI tony you car is garbage too... damn LT1's


j/k i show everyone your Dyno pull on you tube haha

Fixxer99TA

iTrader: (5)

Yeah this thread is scaring me, been running them for a couple years now (on more than a few cars) and no problems, but I think I am going to have to find some wood to knock on...