Master or the slave cylinder?
#21
Hope this will help
Mine was doing the very same thing...I replace the master with a stock one, I did the drill mod, put all back in my car..with the braded line unhooked from the trany I gravity bleed about 1/2 bottle of sintheic fluied. Hooked line back on trany, using the bleeder screw ontop of the trany, and pumping the clutch peddle a couple of time while screw is closed, held peddle to floor, while my son open the screw, bleeding the system. We did that about 5 or 6 times.
Fixed my problem... In short, I think you need to do the famous Drill Mod.
Not sure if this will help but worth a try.
DenPitt=ws6=
01 Trans Am WS6
Fixed my problem... In short, I think you need to do the famous Drill Mod.
Not sure if this will help but worth a try.
DenPitt=ws6=
01 Trans Am WS6