Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Tick master cylinder pic request.

Thread Tools
 
Search this Thread
 
Old 03-02-2009 | 08:51 PM
  #1  
Spike-Z's Avatar
Thread Starter
Launching!

iTrader: (2)
 
Joined: Dec 2006
Posts: 247
Likes: 0
From: Beloeil, Quebec, Canada
Default Tick master cylinder pic request.

Hey guys. Can someone show me a pic of the new Tick clutch master next to the stocker? I need to see the lenght difference from the firewall to the elbow. Measurements would be great too! Thanks!
Old 03-03-2009 | 05:37 AM
  #2  
Spike-Z's Avatar
Thread Starter
Launching!

iTrader: (2)
 
Joined: Dec 2006
Posts: 247
Likes: 0
From: Beloeil, Quebec, Canada
Default

Common, anyone?
Old 03-03-2009 | 08:46 AM
  #3  
Grifter's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Dec 2006
Posts: 1,524
Likes: 5
Default

I don't have it next to the stock one but I have a couple on my camera.
Old 03-03-2009 | 04:03 PM
  #4  
Spike-Z's Avatar
Thread Starter
Launching!

iTrader: (2)
 
Joined: Dec 2006
Posts: 247
Likes: 0
From: Beloeil, Quebec, Canada
Default

Lets see them. Im trying to figure if Ill have to modify my frame rails and wheel well to fit it. Thanks!
Old 03-03-2009 | 08:56 PM
  #5  
Grifter's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Dec 2006
Posts: 1,524
Likes: 5
Default



Old 03-03-2009 | 09:29 PM
  #6  
Spike-Z's Avatar
Thread Starter
Launching!

iTrader: (2)
 
Joined: Dec 2006
Posts: 247
Likes: 0
From: Beloeil, Quebec, Canada
Default

Thanks a lot! if anyone has one with the stocker side by side, Id love to see the difference in lenght from the firewall to the elbow.
Old 03-04-2009 | 07:38 AM
  #7  
ghettocruiser's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Mar 2006
Posts: 1,746
Likes: 2
From: West Chester, PA
Default

Ill have some side by sides this weekend. Im pretty sure I have my old stocker still on the bench. Its got an adjustable end...but the part that sticks in the engine bay is the important side.

Ill try to sit them next to each other with a ruler in between or something.

J.
Old 03-04-2009 | 01:39 PM
  #8  
BuffJoeyD's Avatar
TECH Regular
iTrader: (2)
 
Joined: Feb 2004
Posts: 426
Likes: 0
From: 1985
Default

I musta got an older one, cause mine doesnt have the cool shiney tick performace rear cover.
Old 03-04-2009 | 02:58 PM
  #9  
VIPRETR2's Avatar
10 Second Club
iTrader: (63)
 
Joined: Aug 2004
Posts: 757
Likes: 0
Default

I was working on my Typhoon in the garage so I made sure to get you some pics while I was over there. The Tick is 7.5" from the forward most portion of the firewall mount to the bend of the hose, the stock MC is 4.5". So 3" difference in overall length in the engine compartment.



Old 03-04-2009 | 03:13 PM
  #10  
ghettocruiser's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Mar 2006
Posts: 1,746
Likes: 2
From: West Chester, PA
Default

Huh...Spike looks like I did mis-measure mine. haha. I got out of bed to do it and used an old cloth measuring tape I just happened to have. Guess thats why I was off. haha

That thing is gonna be fun for us...

J.
Old 03-04-2009 | 09:13 PM
  #11  
Spike-Z's Avatar
Thread Starter
Launching!

iTrader: (2)
 
Joined: Dec 2006
Posts: 247
Likes: 0
From: Beloeil, Quebec, Canada
Default

Originally Posted by ghettocruiser
Huh...Spike looks like I did mis-measure mine. haha. I got out of bed to do it and used an old cloth measuring tape I just happened to have. Guess thats why I was off. haha

That thing is gonna be fun for us...

J.
haha! Well I guess we gained 2" without doing anything J.
So were gonna have to deal with at least 3" too long. Im gonna build a jig out of wood with the firewall, wheel well and frame rail specs to mark the exact location where to cut.

VIPRETR2 Thanks a million for those pics. This is exactly what we needed!
Old 03-05-2009 | 09:16 AM
  #12  
Gen414's Avatar
FormerVendor
iTrader: (38)
 
Joined: Nov 2008
Posts: 2,309
Likes: 0
From: Pearland, TX
Default

Anyone got any pics of it installed IN teh car, with reservoir hooked up?
Old 03-05-2009 | 06:06 PM
  #13  
cam's Avatar
cam
TECH Junkie
iTrader: (9)
 
Joined: Apr 2004
Posts: 3,389
Likes: 63
From: in the garage
Default

Let us know how it fits in a third gen when its done
Old 03-05-2009 | 10:59 PM
  #14  
ghettocruiser's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Mar 2006
Posts: 1,746
Likes: 2
From: West Chester, PA
Default

Its gonna be fun. I wont get to mine for awhile yet. I might keep my car in storage for most of march...weather is just too unstable. I dont even want to pull it out with all the salt and crap on the roads.

Ill be taking tons of pics and doing a write up on it whenever I get to it. Unless someone beats me to it...in which case Ill just take pics and ***** em out. haha

J.
Old 03-19-2009 | 02:29 PM
  #15  
black00ssFL's Avatar
TECH Fanatic

iTrader: (24)
 
Joined: Oct 2006
Posts: 1,002
Likes: 2
From: Ocala, FL
Default

I know I'm a little late, but I cleaned out the memory card on the camera and found a pic for ya.




All times are GMT -5. The time now is 12:08 PM.