explain the drill mod please
Thread Starter
TECH Apprentice
Joined: Oct 2003
Posts: 344
Likes: 0
From: miami, florida
explain the drill mod please i heard that the drill mod is good for a stock master. please, can someone explain what does it consist of and how to do it? i am gonna do a clutch this weekend and need all the info on how to do the drill mod. where can i find details on how to do it? thanks alot for any help
Originally Posted by whitecamaross
i heard that the drill mod is good for a stock master. please, can someone explain what does it consist of and how to do it? i am gonna do a clutch this weekend and need all the info on how to do the drill mod. where can i find details on how to do it? thanks alot for any help
Installuniversity.net will give you exactly how to do it.
This will explain why: http://www.chevyhiperformance.com/howto/39021/
David
This will explain why: http://www.chevyhiperformance.com/howto/39021/
David
11 Second Club
Joined: Apr 2003
Posts: 630
Likes: 0
From: Maui, Hawaii
I did the drill mod today, I dont know if its just in my mind but shifting feels alot better, I went for a little test run and I pounded it into second gear and the clutch pedal dint stick to the floor and car fishtaled like a ****, shifts like butter. Next week thursday Ill try to get my spec in but my auto instructor told me that itll be alot safer to put in an sfi aproved bell housing while @ it.
who makes sfi aproved bell housing for our cars? thanks.
Mark
who makes sfi aproved bell housing for our cars? thanks.
Mark
11 Second Club
Joined: Apr 2003
Posts: 630
Likes: 0
From: Maui, Hawaii
Rex, I dint get any pm's and my user name and past word isnt working @ efi.I Got so much ????'s man, about the rear end. and I just found out that no one makes sfi aproved bellhousing for our cars, mcleods one doesnt fit!. Do you have one in the poser? laters
Mark
Mark
An aswer to your SFI bellhousing. NO ONE, yet. McLeod put one out (there is a trend below with discussions on it) but it doesn't fit our cars.
The only other solution is a blanket. BUT there is also a trend on blankets.
You'll not need one until you run 11.99 or faster AND the tech person cathese you without one.
Most of us M6 guys are just waiting on an SFI bellhousing that fits.
David
The only other solution is a blanket. BUT there is also a trend on blankets.
You'll not need one until you run 11.99 or faster AND the tech person cathese you without one.
Most of us M6 guys are just waiting on an SFI bellhousing that fits.
David
Trending Topics
Staging Lane
Joined: Jan 2004
Posts: 57
Likes: 0
From: Iowa
Check out this Link to Chevy High Performance, Tells ya all about the drill mod, whats happening and why its happening....
In The Clutch
In The Clutch
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
