Vertigo

iTrader: (1)

https://ls1tech.com/forums/lsx-parts-sale/293202-fs-stock-adjustable-master-cylinder.html

Can you do this to a stock master?...make it adj.?

THx

ThirdGenLS1

iTrader: (11)

Yes you can make your stock one adj., ram also makes one thats a stock master that is adj. goes for 160 shipped from neweraperformanceparts.com.

Justin

David Gordon

iTrader: (1)

I have the Ram and it sucks. I had the McCloud before and it was better.

Vertigo

iTrader: (1)

I've been hearing about how the Mclead is crap. Apparently they leave some flash inside the cylinder while fabricating them causing failure. So if anyone has some more info on RAM vs Mclead Adj master. Or even a write-up on how to convert your stocker into an Adj. please post!!! THX!

Vertigo

iTrader: (1)

Guys I am bringing this back from the dead b/c i just installed a Spec III and want to know how to make my stock master adj. I've seen a few people mention a writeup on this floating around...Can someone point me in the right direction? THX!

Xtnct00WS6

iTrader: (8)

I'll be able to give you some good info in a few weeks. I'm installing the Ram master soon. It shipped out today and I should get it by Friday. Thanks Texas Speed...you guys rock! Hopefully I can get it installed this weekend. I'll let ya know how it goes. Maybe some side by side pics would help...?

1madss

iTrader: (10)

Here ya go

https://ls1tech.com/forums/manual-transmission/317767-stock-adjustable-master-cylinder-writeup.html

KGSloan

i made my mc adjustable by doing this. it works great. be careful when reasembling the mc thought, the seals are easy to tear.

LS_WANG

Futral Motorsports makes a good one, I ordered it about two days ago, I was in desprite need of it so Candy gracefully sent it next day air!!! I know I will be pleased with the product, but I will post pictures of install and other stuff when I get it in

Vertigo

iTrader: (1)

Thank you!!!!!!!