View Poll Results: What Clutch are You Using? (select one or more)
LS1 (Stock)
341
21.05%
LS6
152
9.38%
LS7
182
11.23%
Textralia OZ700
115
7.10%
Textralia Exo-Skel
36
2.22%
SPEC 1
18
1.11%
SPEC 2
45
2.78%
SPEC 2+
33
2.04%
SPEC 3
192
11.85%
SPEC 3+
108
6.67%
SPEC 4
23
1.42%
SPEC 5
26
1.60%
McLeod Single Disc
41
2.53%
McLeod Twin Disc
78
4.81%
Ram VDS 300
4
0.25%
Ram VDS 900
4
0.25%
Ram VDS 980
6
0.37%
Ram VDS 910 "Race"
10
0.62%
Ram HDX
6
0.37%
Ram Powergrip
21
1.30%
Ram Powergrip HD
87
5.37%
Exedy Hyper Single Disc
5
0.31%
Exedy Twin Disc
14
0.86%
Centerforce Dual Friction
132
8.15%
Hays
4
0.25%
SLP/LS6
17
1.05%
ZOOM
12
0.74%
Luk Pro Gold
20
1.23%
Multiple Choice Poll. Voters: 1620. You may not vote on this poll
What Clutch is Everyone Using?
#101
Banned
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
My stock '02 LS6 is holding perfectly after 40k miles of straight abuse and around 20 track passes. Car currently makes 421rwhp.
I don't know how much longer it'll hold out when I bolt on the twin turbo kit though.
Probably going with an aluminum LS2 flywheel/LS7.
I don't know how much longer it'll hold out when I bolt on the twin turbo kit though.
Probably going with an aluminum LS2 flywheel/LS7.
#102
On The Tree
iTrader: (5)
Join Date: Mar 2005
Location: San Jose, Ca
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
FWIW, I will never recommend anyone to buy SPEC. Try it out if you like, But You will be disappointed. Mine didn't just wear out, but one of the springs dropped out upon removal meaning it was already broken. Don't even get me started on the chatter!!!!
I'm very happy with my LUK Gold clutch. The diffrence is night and day. This clutch is a blessing. Feels stock, but grabs nicely without that dam chatter.
I'm very happy with my LUK Gold clutch. The diffrence is night and day. This clutch is a blessing. Feels stock, but grabs nicely without that dam chatter.
#103
Spec is synonomous with "your springs will fall out kid, what r u crazy?"
If I was running a spec I wouldn't wait for it to fail, I'd take it out and replace it with a clutchnet.com or a valeo if money was low. Then I'd tie it the back of my rearend but long enough so it hangs behind the license plate with a sign sayn "spec is dookie".
Or I may modify it by simply shaking it a few times, until of course the spring would fall out, enlightening it so I can Frisbee it with a dog.
You can paint an arrow on it and spin it around to use it for spin the "clutch".
I wonder if I were to tie one to a tree during a hurricane, if the springs would fly off?
I can always leave the springs in tho, and sell it as a ninja weapon... instructions reading : "fling this towards your enemy, as it zooms by them, the springs will automatically release piercing their neck areas and they will bleed to death."
If I fidget with it enough I can prolly turn it into a really cool hubcap. It's kevlar material may never rust and protect me from bullets in the ghetto.
I could put it over my head when I go the beach. And it become the next en vogue item in south beach, it would sell like hotcakes some more!!
I could open up an online bizniz "I weld spec springs in.com" motto reading "tired of these dang spec spring falling out?, for only 19.95 I can weld these for you, or 3 easy payments of 7.97 on your credit card."
My new kick it line to chicks is "my z...yep yep...400hp and a Spec..yep yep" their response??? "lets go to the room baby".
Even Bush has a thing for specs, his plans are to deport them to tijuana if their not registered. Problem like all others...solved.
How many licks does it take to get to the springs in the center of a spec-clutch-blow-pop? (in that order)
If I was running a spec I wouldn't wait for it to fail, I'd take it out and replace it with a clutchnet.com or a valeo if money was low. Then I'd tie it the back of my rearend but long enough so it hangs behind the license plate with a sign sayn "spec is dookie".
Or I may modify it by simply shaking it a few times, until of course the spring would fall out, enlightening it so I can Frisbee it with a dog.
You can paint an arrow on it and spin it around to use it for spin the "clutch".
I wonder if I were to tie one to a tree during a hurricane, if the springs would fly off?
I can always leave the springs in tho, and sell it as a ninja weapon... instructions reading : "fling this towards your enemy, as it zooms by them, the springs will automatically release piercing their neck areas and they will bleed to death."
If I fidget with it enough I can prolly turn it into a really cool hubcap. It's kevlar material may never rust and protect me from bullets in the ghetto.
I could put it over my head when I go the beach. And it become the next en vogue item in south beach, it would sell like hotcakes some more!!
I could open up an online bizniz "I weld spec springs in.com" motto reading "tired of these dang spec spring falling out?, for only 19.95 I can weld these for you, or 3 easy payments of 7.97 on your credit card."
My new kick it line to chicks is "my z...yep yep...400hp and a Spec..yep yep" their response??? "lets go to the room baby".
Even Bush has a thing for specs, his plans are to deport them to tijuana if their not registered. Problem like all others...solved.
How many licks does it take to get to the springs in the center of a spec-clutch-blow-pop? (in that order)
Last edited by License2Ill; 06-14-2006 at 10:13 AM.
#105
Sawzall and Welder Mod
iTrader: (46)
Originally Posted by License2Ill
Spec is synonomous with "your springs will fall out kid, what r u crazy?"
If I was running a spec I wouldn't wait for it to fail, I'd take it out and replace it with a clutchnet.com or a valeo if money was low. Then I'd tie it the back of my rearend but long enough so it hangs behind the license plate with a sign sayn "spec is dookie".
Or I may modify it by simply shaking it a few times, until of course the spring would fall out, enlightening it so I can Frisbee it with a dog.
You can paint an arrow on it and spin it around to use it for spin the "clutch".
I wonder if I were to tie one to a tree during a hurricane, if the springs would fly off?
I can always leave the springs in tho, and sell it as a ninja weapon... instructions reading : "fling this towards your enemy, as it zooms by them, the springs will automatically release piercing their neck areas and they will bleed to death."
If I fidget with it enough I can prolly turn it into a really cool hubcap. It's kevlar material may never rust and protect me from bullets in the ghetto.
I could put it over my head when I go the beach. And it become the next en vogue item in south beach, it would sell like hotcakes some more!!
I could open up an online bizniz "I weld spec springs in.com" motto reading "tired of these dang spec spring falling out?, for only 19.95 I can weld these for you, or 3 easy payments of 7.97 on your credit card."
My new kick it line to chicks is "my z...yep yep...400hp and a Spec..yep yep" their response??? "lets go to the room baby".
Even Bush has a thing for specs, his plans are to deport them to tijuana if their not registered. Problem like all others...solved.
How many licks does it take to get to the springs in the center of a spec-clutch-blow-pop? (in that order)
If I was running a spec I wouldn't wait for it to fail, I'd take it out and replace it with a clutchnet.com or a valeo if money was low. Then I'd tie it the back of my rearend but long enough so it hangs behind the license plate with a sign sayn "spec is dookie".
Or I may modify it by simply shaking it a few times, until of course the spring would fall out, enlightening it so I can Frisbee it with a dog.
You can paint an arrow on it and spin it around to use it for spin the "clutch".
I wonder if I were to tie one to a tree during a hurricane, if the springs would fly off?
I can always leave the springs in tho, and sell it as a ninja weapon... instructions reading : "fling this towards your enemy, as it zooms by them, the springs will automatically release piercing their neck areas and they will bleed to death."
If I fidget with it enough I can prolly turn it into a really cool hubcap. It's kevlar material may never rust and protect me from bullets in the ghetto.
I could put it over my head when I go the beach. And it become the next en vogue item in south beach, it would sell like hotcakes some more!!
I could open up an online bizniz "I weld spec springs in.com" motto reading "tired of these dang spec spring falling out?, for only 19.95 I can weld these for you, or 3 easy payments of 7.97 on your credit card."
My new kick it line to chicks is "my z...yep yep...400hp and a Spec..yep yep" their response??? "lets go to the room baby".
Even Bush has a thing for specs, his plans are to deport them to tijuana if their not registered. Problem like all others...solved.
How many licks does it take to get to the springs in the center of a spec-clutch-blow-pop? (in that order)
#109
TECH Apprentice
iTrader: (1)
Join Date: Apr 2003
Location: So Fla
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Xtreme57
What does a new ls7 clutch kit cost?
Get one, you will love it, I did!
#111
TECH Regular
iTrader: (6)
Join Date: Feb 2003
Location: Nj
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SOMSS
About $635 shipped, that's with a throw out bearing, flywheel, pressure plate and a new slave!
Get one, you will love it, I did!
Get one, you will love it, I did!
Not too bad. I don't need a flywheel though - i have an aluminum one from spec. So take that out of the equation and that's a pretty good price. Almost certainly gonna be my next clutch.
#114
12 Second Club
iTrader: (2)
Originally Posted by Xtreme57
Not too bad. I don't need a flywheel though - i have an aluminum one from spec. So take that out of the equation and that's a pretty good price. Almost certainly gonna be my next clutch.
I paid 786.04 shipped for the LS7CLUTCHKIT [which includes flywheel, PP, and disc], and also in that order got a new pilot bearing (roller style), 01+ slave, and 01+ master (Mine's a 98). I also got new clutch bolts. All from fredbeans.com.
Install was straightforward, no spacers needed behind the slave. Both slave and master come full and bled, so after I did the drill mod to the master hose restriction, I just bled the master again over the sink. With both master and slave bled, no bleededing on the car was needed. Some have commented that the pedal starts a bit low; I pumped the pedal a few times with my toes curled over the end, and had the pedal start off dead center of travel.
Even with only a hundred miles the clutch was solid; at 500 miles of moderately hard break-in, including a couple rolling full throttle runs through the gears, it feels as though it'll hold anything my stock engine can hit it with, but I have yet to try a serious launch on sticky tires at the track.
#117
Launching!
iTrader: (97)
Join Date: Jun 2006
Location: McDonough, GA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Boodyrider
Well, no. The LS7 REQUIRES that you use the LS2 flywheel, so don't count it out. They are NOT the same, and the LS1 style flywheel CANNOT be made to work with the LS7 clutch.
I paid 786.04 shipped for the LS7CLUTCHKIT [which includes flywheel, PP, and disc], and also in that order got a new pilot bearing (roller style), 01+ slave, and 01+ master (Mine's a 98). I also got new clutch bolts. All from fredbeans.com.
Install was straightforward, no spacers needed behind the slave. Both slave and master come full and bled, so after I did the drill mod to the master hose restriction, I just bled the master again over the sink. With both master and slave bled, no bleededing on the car was needed. Some have commented that the pedal starts a bit low; I pumped the pedal a few times with my toes curled over the end, and had the pedal start off dead center of travel.
Even with only a hundred miles the clutch was solid; at 500 miles of moderately hard break-in, including a couple rolling full throttle runs through the gears, it feels as though it'll hold anything my stock engine can hit it with, but I have yet to try a serious launch on sticky tires at the track.
I paid 786.04 shipped for the LS7CLUTCHKIT [which includes flywheel, PP, and disc], and also in that order got a new pilot bearing (roller style), 01+ slave, and 01+ master (Mine's a 98). I also got new clutch bolts. All from fredbeans.com.
Install was straightforward, no spacers needed behind the slave. Both slave and master come full and bled, so after I did the drill mod to the master hose restriction, I just bled the master again over the sink. With both master and slave bled, no bleededing on the car was needed. Some have commented that the pedal starts a bit low; I pumped the pedal a few times with my toes curled over the end, and had the pedal start off dead center of travel.
Even with only a hundred miles the clutch was solid; at 500 miles of moderately hard break-in, including a couple rolling full throttle runs through the gears, it feels as though it'll hold anything my stock engine can hit it with, but I have yet to try a serious launch on sticky tires at the track.
Wow you paid to much for a "stock clutch".
Competion clutchs has a kit everything minus throw out bearing for 499.99. 16lb steel flywheel, 6 puck and a heavy duty pressure plate, you cant beat it.
I have been beating on mine for a while now several track days and not the first problem.
#118
Banned
iTrader: (2)
Join Date: Oct 2003
Location: New York
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
i JUST purchased the TEXTRALIA OZ clutch and 18 pound flywheel from BYUNSPEED.
Not too bad a price. And it looks like a BEEFY system.
I am putting down HOPEFULLY 460-480 rwhp soon (like next week) so I am gonna need it.
lol
I will keep you guys informed.
Not too bad a price. And it looks like a BEEFY system.
I am putting down HOPEFULLY 460-480 rwhp soon (like next week) so I am gonna need it.
lol
I will keep you guys informed.