what's everyone doing for the knobs??
#61
12 Second Club
Join Date: Sep 2005
Location: Bucks County, Pa.
Posts: 4,273
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2MuchRiceMakesMeSick
i really like my hardbar
#62
12 Second Club
Join Date: Sep 2005
Location: Bucks County, Pa.
Posts: 4,273
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LS1 Cobra
Machined my own from billet along with the hand brake grip. I machined it to lengthen the gear stick a bit. My shifter setup is already short throw so I thought I'd make it longer to make for a shorter reach from the steering wheel.
It looks ugly and industrial which is what I wanted but it's surprisingly comfortable. You grip it pistol grip rather than putting your hand on the top. I reckon this grip gives very good control when going 2nd-3rd.
Still working on paint and carpet
Cheers
Michael
It looks ugly and industrial which is what I wanted but it's surprisingly comfortable. You grip it pistol grip rather than putting your hand on the top. I reckon this grip gives very good control when going 2nd-3rd.
Still working on paint and carpet
Cheers
Michael
#63
On The Tree
Join Date: Jun 2004
Location: Melbourne, Australia
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to Hi Jack the thread
No, it's all replica. I machined up the horn button/steering wheel boss from billet. The pedals were castings and I machined them to fit too. Everything is adjustable, brake bias, pedal height etc. I made the Gas pedal from scratch. It's adjustable for just about everything. Makes it easy to set up for heel toe etc.
Cheers
Michael
No, it's all replica. I machined up the horn button/steering wheel boss from billet. The pedals were castings and I machined them to fit too. Everything is adjustable, brake bias, pedal height etc. I made the Gas pedal from scratch. It's adjustable for just about everything. Makes it easy to set up for heel toe etc.
Cheers
Michael
#64
Kleeborp the Moderator™
iTrader: (11)
Originally Posted by dailydriver
Steve; ALL of the sparcos use that three allen key against the handle type locking system, NOT threading, hence they are "universal fit". Although mine did have soft plastic material near the top of the **** that I was able to "tap" with the Pro 5.0 handle so it was on straight before locking the allen keys down.
#65
Originally Posted by MeentSS02
I'm thinking that doesn't come in the stock M16x1.5 thread diameter and pitch...am I correct? Seems like the nicer ***** max out around 14mm, or go with the more common M12x1.75 (I think) that the Mustang ***** use.
#69
Originally Posted by boondiggys
another vote for the leather hurst logo
Hey were do you find this to buy??
I REALLY want one because the last two shifters I tried to buy ended up being discontinued AND out of stock.
#70
TECH Resident
iTrader: (165)
Join Date: Feb 2004
Location: NNJ
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
http://www.afterthoughtsauto.com... click on the performance section, then f bod and shifter section...got it a year ago and paid 34.95