Can Anyone Beat This?
Thread Starter
Registered User
Joined: Jul 2007
Posts: 5
Likes: 0
Can Anyone Beat This? I just made my 101 pass on sunday on a stock clutch using drag radails and taking of at 4000 rpm. i can feel the clutch is pretty wornout because of the high pedal engagement but i can still pull out 1.8 60 feet.
ho can beat this
ho can beat this
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
101 passes.... all @4000 and all with ets? my stock was holding plenty good with about 40 or so 4500 drops cutting 1.7 - 1.8 60s. also with stock 10 bolt at about 400rwhp so i dont find it all that amazing.... My slave finally said see ya so I up graded, but most on this forum replace the clutch and the 10 bolt because they are a "weak link" before they break something.... 12 bolt and built tranny are in the near future for me but I stopped racing................................
for the moment
for the moment
12 Second Club
Joined: Mar 2005
Posts: 1,498
Likes: 0
From: Corpus Christi
Originally Posted by frisky2101
101 passes.... all @4000 and all with ets? my stock was holding plenty good with about 40 or so 4500 drops cutting 1.7 - 1.8 60s. also with stock 10 bolt at about 400rwhp so i dont find it all that amazing.... My slave finally said see ya so I up graded, but most on this forum replace the clutch and the 10 bolt because they are a "weak link" before they break something.... 12 bolt and built tranny are in the near future for me but I stopped racing................................
for the moment
for the moment
I was cutting 1.98/1.82 with stock clutch/et dr and 10 bolt but, after about my 5th pass I was still hooking but, clutch starting slipping from 2nd going into 3rd. this is with 418rwhp/389 rwtq no juice.