Blew my tranny again!!!!
#1
Teching In
Thread Starter
Join Date: Nov 2006
Location: san jo
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Blew my tranny again!!!!
So blew up my tranny again. 3rd and 4th gear don't go in. So this time I'm going to rebuild my tranny instead of buying a factory one again. Also I had a B&M shifter and thinkin of changing for a 5.0 shiter? This is the 2nd tranny I blew up with these shifter. Can it be the shifter or are the t56 factory tranny's weak?
#3
sounds like a drill mod issue, 3rd and 4th are usually the victims of the clutch.
Combined with a factory T-56 (aluminum 3-4 shift fork), it's no wonder it fails first.
First, get it rebuilt at sixspeed inc, or at the least grab their 700hp stage 1 kit.
Second, grab newer 01-02 hydraulics as a precaution and do the drill mod to the braided line. www.installuniversity.com for how to do the drill mod.
Combined with a factory T-56 (aluminum 3-4 shift fork), it's no wonder it fails first.
First, get it rebuilt at sixspeed inc, or at the least grab their 700hp stage 1 kit.
Second, grab newer 01-02 hydraulics as a precaution and do the drill mod to the braided line. www.installuniversity.com for how to do the drill mod.
#5
TECH Apprentice
Join Date: Nov 2006
Location: Copenhagen
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts