Southern Indiana Club
#6661
It was only good because it was cold! Dont have to worry about heat soak in the blower when its 40. Your car would have loved it.
Liljay do you have a buddy that works at the zone on greenriver? I go there from time to time and bs with a guy up there who talks about his buddies ls1 car that has a heads cam setup
Liljay do you have a buddy that works at the zone on greenriver? I go there from time to time and bs with a guy up there who talks about his buddies ls1 car that has a heads cam setup
#6662
TECH Senior Member
iTrader: (39)
Yeah my friend Kevin is the manager there. He has told me about your car. He said its pretty bad ***. I have a 00' Firehawk w/ a EPS cam, TEA heads, ported FAST 92/92, L/T's, 3 in ORYP w/ a 4in cutout back into the SLP dual/dual muffler. Tick stage 2 rebuild w/ monster 3.5 clutch and 3.42 gears. It did 430/420 earlier this year. I then found out the machine shop set my heads completely wrong. Wrong spring height. I had seal to retainer contact, wrong retainers, wrong seat locators. I can't believe I didn't blow the car up. I hope to have it back on the road next week. I ended up having too long of pushrod in it too. I "hope" that it does closer to 450 with everything setup correctly but we will see.
#6663
On The Tree
iTrader: (7)
Join Date: May 2009
Location: Evansville, IN
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
It was only good because it was cold! Dont have to worry about heat soak in the blower when its 40. Your car would have loved it.
Liljay do you have a buddy that works at the zone on greenriver? I go there from time to time and bs with a guy up there who talks about his buddies ls1 car that has a heads cam setup
Liljay do you have a buddy that works at the zone on greenriver? I go there from time to time and bs with a guy up there who talks about his buddies ls1 car that has a heads cam setup
#6664
Even with the heat on full blast i was still chilled through when i got home from the track. i must be getting old! I'll have to check out your car when its put back together, sounds like its going to be a beast!
#6665
TECH Senior Member
iTrader: (39)
Hey guys. I'm selling a complete HSW nitrous kit. It's been bolted up but never used. Microedge+, Interface, everything.
https://ls1tech.com/forums/parts-cla...l#post15595703
PM me if someone is interested.
https://ls1tech.com/forums/parts-cla...l#post15595703
PM me if someone is interested.
#6666
Teching In
iTrader: (2)
Join Date: Nov 2008
Location: Evansville, Indiana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
When I get a cam and pushrods anyone want to show me how to install them? Engine and trans are laying on the floor 5.3 4l60e Im taking the 60 out for a 4l80e. I have a ls1 intake, pan, ps pump, alt w/ brackets. Oh and no car for the install yet. Know where a 70-73 camaro is? Thanks
#6670
Launching!
Join Date: Nov 2010
Location: Southern Indiana
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
So I had a new cam installed (MS4) with double valve springs, hardened chromoly pushrods, and a 85mm intake and throttle body, now its knocking. Sounds like its in the heads. Im guessing a collapsed lifter but can any of you guys help identify? Im in Charlestown.
#6675
Launching!
Join Date: Nov 2010
Location: Southern Indiana
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
I did not get new lifters as it was not suggested by the salesman... biting me in the *** now. but it is definitely not a normal noise, definitely a knock.
#6679
Launching!
Join Date: Nov 2010
Location: Southern Indiana
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
No idea what they were set at and I was told to just used the 7.4 pushrods as I have stock heads and all. Its definitely not a sewing machine noise, and wheres it snowin at?