starting off Locally with a BIG top of the line SALE
07-07-2005, 01:09 AM
#1
UPDATED! starting off Locally with a BIG top of the line SALE NEW ITEMS AND PRICES AS OF 7/9/05 IN POST 1 & 2
hey *local guys......*(driving distance)
i'm going to start out slow with a couple things at a time until i know for sure what i'm getting rid of. for now, here's a few things, and eventually a bunch of suspensions pieces and misc. stuff off of my scrapped project will be added. pics can be seen on my home page of some of the parts, including the hood, wheels(which come with the slicks, not the M/T radials), and the spoiler on the car yet.
Hood and Spoiler together.... $1100 FIRM!
or can do $1000 Firm plus stock Z-28 spoiler
1) Brand New VFN Carbon Fiber 3" raised SS hood in VFN primer. this is a bolt on paintable setup that gives you the strength and security of a factory bolt on, with the weight of most pin on's at 15.5 lbs. i will also include a new factory grille/scoop insert. New this piece is $1338.00....Selling for $850.00 FIRM
2) Brand New Bogart/Monocoque Prostar wheels and M/T tires. this is a brand new, 0 mile mounted only package that consists of 15x4.5 fronts with 26x7.5 M/T Frontrunners and 15x11/6.5" b.s. rears with M/T 28x10.5W slicks. New this package would run about $2300+....Selling for $1700.00....Sale Pending...SOLD!
3) SS spoiler off of a Pewter 2000 SS. this is a true SLP unit, not an off brand, and is mint. $300.00...Sale Pending
there will be more added after the weekend, but i need to take an inventory of what i can and cannot use and then figure out a reasonable price for each item. check back later.
Please PM me with interest.
thanks,
Dave
hey *local guys......*(driving distance)
i'm going to start out slow with a couple things at a time until i know for sure what i'm getting rid of. for now, here's a few things, and eventually a bunch of suspensions pieces and misc. stuff off of my scrapped project will be added. pics can be seen on my home page of some of the parts, including the hood, wheels(which come with the slicks, not the M/T radials), and the spoiler on the car yet.
Hood and Spoiler together.... $1100 FIRM!
or can do $1000 Firm plus stock Z-28 spoiler
1) Brand New VFN Carbon Fiber 3" raised SS hood in VFN primer. this is a bolt on paintable setup that gives you the strength and security of a factory bolt on, with the weight of most pin on's at 15.5 lbs. i will also include a new factory grille/scoop insert. New this piece is $1338.00....Selling for $850.00 FIRM
2) Brand New Bogart/Monocoque Prostar wheels and M/T tires. this is a brand new, 0 mile mounted only package that consists of 15x4.5 fronts with 26x7.5 M/T Frontrunners and 15x11/6.5" b.s. rears with M/T 28x10.5W slicks. New this package would run about $2300+....Selling for $1700.00....Sale Pending...SOLD!
3) SS spoiler off of a Pewter 2000 SS. this is a true SLP unit, not an off brand, and is mint. $300.00...Sale Pending
there will be more added after the weekend, but i need to take an inventory of what i can and cannot use and then figure out a reasonable price for each item. check back later.
Please PM me with interest.
thanks,
Dave
Last edited by PRAY HRD; 07-22-2005 at 10:42 PM. Reason: items added
07-07-2005, 09:34 PM
#2
--------------------------------------------------------------------------------
ok, just to give you all an idea and a heads up as to what most of the other items i will be selling consist of...
i have a complete suspension setup more than capable of 8 second 1/4 mile blasts and ALL is brand new, but on the car which is in the air currently so no weight has even been applied to it yet. the big piece i am going to put up for sale will consist of.....
a completely assembled front suspension and brake package. i will first post it for sale complete and if there is only interest from members for particular parts, i'll go from there. but i'm in no hurry so, whatever happens happens.
i have a full chromoly Pro Fab K-member with no motor mounts and upper and lower a-arms in red, also in 'moly with all new ball joints. a power rack and pinion from my 2000 SS with a Bear bump stop kit. Strange Drag brakes complete and assembled with the correct modifications needed for the hub and bracket to mount on to the spindle, which was given a thorough wire wheel treatment and painted black. the coilovers are QA1-R single adj. 90/10 shocks with 275# springs. if you are really interested, i can provide a couple pics for you, which i think are actually on my homepage.... SOLD!
links for front end assembly...SOLD
http://pg.photos.yahoo.com/ph/ambera...2e.jpg&.src=ph
http://pg.photos.yahoo.com/ph/ambera...40.jpg&.src=ph
the rest of the suspension consists of...
Strange double adj. rear shocks ....... $400 plus shipping... SOLD
Wolfe Racecraft 'moly LCA's and PHB with solid rod ends, and i had them powdercoated black...$525 w/pc'ing, sell $375...Sold
BMR X-treme T/A in black ...... $450 plus shipping...Sold
Brand new RCI trans blanket..$50
AFCO BIG aluminum radiator for 4th Gen from Billingsley...$200 pic on homepage. (mounted but never used)
BeCool dual electric fans bought to fit for the AFCO radiator...New $280...Sell $200
Fan & Radiator together for $350
3" factory SS aftercat pipe with QTP electric cutout, Flowmaster muffler, and dual Borla round slash cut stainless tips....under 3000 miles....$350 (great sound and looks, fully welded, just bolt in and go)
New BMR TH400/LS1 conversion with urethane mount...New $195...Sell $125
and a Billingsley Racing Fab 9 that i can sell whole or minus the third member. this piece as i bought it costs just under $3800.00. it comes with every upgrade he offers including...
C/Moly construction, narrowed 2 1/8"/side, (requires a 5" b.s. using a 15x10) 40 spline gun drilled and lightened axles, 5/8" race studs, aluminum center section, Motive lightened 3.70 gears and lightened steel spool, Billingsleys anti roll bar, LCA relocation kit to move them inboard for more tire clearance, and powdercoated black. i think that's all the details. $3000.00FIRM...$1900 w/o center section. FIRM!
i also have a Billingsley HVAC blockoff plate $40Sale Pending
and MORE TO COME! but i'll have to look through everything. let me know if there is anything of interest to you and i'll get a price together for you.
oh, i may be selling my freshly gone through Coan th400 with reverse manual valvebody, trans brake, Madman dipstick tube, and TCI deep, finned aluminum pan. that i know i'd need about $1000 for the setup if you or anyone you know may be interested. and FYI...i do pretty good with package deal prices to!
later,
Dave
ok, just to give you all an idea and a heads up as to what most of the other items i will be selling consist of...
i have a complete suspension setup more than capable of 8 second 1/4 mile blasts and ALL is brand new, but on the car which is in the air currently so no weight has even been applied to it yet. the big piece i am going to put up for sale will consist of.....
a completely assembled front suspension and brake package. i will first post it for sale complete and if there is only interest from members for particular parts, i'll go from there. but i'm in no hurry so, whatever happens happens.
i have a full chromoly Pro Fab K-member with no motor mounts and upper and lower a-arms in red, also in 'moly with all new ball joints. a power rack and pinion from my 2000 SS with a Bear bump stop kit. Strange Drag brakes complete and assembled with the correct modifications needed for the hub and bracket to mount on to the spindle, which was given a thorough wire wheel treatment and painted black. the coilovers are QA1-R single adj. 90/10 shocks with 275# springs. if you are really interested, i can provide a couple pics for you, which i think are actually on my homepage.... SOLD!
links for front end assembly...SOLD
http://pg.photos.yahoo.com/ph/ambera...2e.jpg&.src=ph
http://pg.photos.yahoo.com/ph/ambera...40.jpg&.src=ph
the rest of the suspension consists of...
Strange double adj. rear shocks ....... $400 plus shipping... SOLD
Wolfe Racecraft 'moly LCA's and PHB with solid rod ends, and i had them powdercoated black...$525 w/pc'ing, sell $375...Sold
BMR X-treme T/A in black ...... $450 plus shipping...Sold
Brand new RCI trans blanket..$50
AFCO BIG aluminum radiator for 4th Gen from Billingsley...$200 pic on homepage. (mounted but never used)
BeCool dual electric fans bought to fit for the AFCO radiator...New $280...Sell $200
Fan & Radiator together for $350
3" factory SS aftercat pipe with QTP electric cutout, Flowmaster muffler, and dual Borla round slash cut stainless tips....under 3000 miles....$350 (great sound and looks, fully welded, just bolt in and go)
New BMR TH400/LS1 conversion with urethane mount...New $195...Sell $125
and a Billingsley Racing Fab 9 that i can sell whole or minus the third member. this piece as i bought it costs just under $3800.00. it comes with every upgrade he offers including...
C/Moly construction, narrowed 2 1/8"/side, (requires a 5" b.s. using a 15x10) 40 spline gun drilled and lightened axles, 5/8" race studs, aluminum center section, Motive lightened 3.70 gears and lightened steel spool, Billingsleys anti roll bar, LCA relocation kit to move them inboard for more tire clearance, and powdercoated black. i think that's all the details. $3000.00FIRM...$1900 w/o center section. FIRM!
i also have a Billingsley HVAC blockoff plate $40Sale Pending
and MORE TO COME! but i'll have to look through everything. let me know if there is anything of interest to you and i'll get a price together for you.
oh, i may be selling my freshly gone through Coan th400 with reverse manual valvebody, trans brake, Madman dipstick tube, and TCI deep, finned aluminum pan. that i know i'd need about $1000 for the setup if you or anyone you know may be interested. and FYI...i do pretty good with package deal prices to!
later,
Dave
Last edited by PRAY HRD; 07-22-2005 at 10:44 PM.
07-09-2005, 08:57 AM
#6
10 Second Club
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
That rear end is a little over kill for what I need. I don't plan on going 8's or 9's.
I'm only looking to spend 2K on one.
Your's has been narrowed?? Why?
I'm only looking to spend 2K on one.
Your's has been narrowed?? Why?
Trending Topics
07-09-2005, 12:39 PM
#10
all pm's and post's responded to via pm. if anyone else is interested in anything, let me know.
thanks
Dave
NBM2001Z28....hey man, i'm still going to, just even more now with what my new top secret
project is!
thanks
Dave
NBM2001Z28....hey man, i'm still going to, just even more now with what my new top secret
project is! Last edited by PRAY HRD; 07-09-2005 at 12:46 PM.
07-16-2005, 02:28 PM
#15
the trans was gone through and Never installed it. i'm not sure on the selling it part yet, but i will definately be selling the BMR cross member for it. if you're interested, you can pick it up for $125. it's brand new, never installed.
Dave
Dave
