fbody83

Anyone have any racing or dyno vids of v8's revving over 7000? I love the sound of them! I have this one vid of a camaro and a bike racing and in the end the camaro sounds like he rev's to high hell. Anyone have any info on this car or know them?

http://media.putfile.com/Camaro-w-n2o-vs-CBR600f4i

ls1-ss

iTrader: (1)

Don't have any vids, but I read a couple months back in Muscle Car Review(I think) of the 69 Z/28 302 Hemi, it spun to 10,600 rpm and made 600+hp, now thats really cranking. To bad it was never put into production.

1LoudTA

iTrader: (11)

that car in the race sounded like it was revvin at least 7200/7300. im sure he had a nice forged bottom end, i think you'd be able to get away with that without going solid roller.

1BAD02WS6

iTrader: (-1)

doesnt sound to me like its revving to high to me sounds good though

mattr228

iTrader: (10)

this is S.A.M.'s 395cid Ford going up to 9600

http://www.samracing.com/docs/95must...angengine1.wmv


and S.A.M.'s 427 Production block & headed LS1

http://www.samracing.com/docs/99cama...s/ls1dyno2.mpg

skewba98z28

iTrader: (14)

No vids here either. But I got a buddy with a 69 Camaro with a 377 that will spin 8750 through LT's 3in in and out 1 chamber Flows with turndowns and get's there quick. That thing sounds sinster.

BigBronco

iTrader: (2)

those are two nice vids you posted matt

NASTE_SS

its even better in person

-matt

67maro

My dads buddy has a built 347 stroker in his mustang that will rev to over 9000 its got heads of rust wallace practice car. Great setup and makes over 750hp on race gas and its all n/a.

Sabre002

iTrader: (7)

U want high reving small block u need to come here where I live in Mooresville u hear SB2, ford, and dodge cup motors dynoing every day. oh yea they turn 10 grand

Chadder

iTrader: (2)

what???! a z/28 with a hemi???

BRAKE

iTrader: (14)

Same here, what in the hell is he talking about. First off in the '69 Z/28 there was a badass 302 which would rev to 7500 all day long right off the showroom floor. And in 1969 that was a TON of rpm's. Also rated at 275 or 290 hp (i cant rembmer) but I do know that it later made over 420 on the engine dyno. It was a trans-am race motor basically, de-tuned for the street. Good luck finding one, and if you do get your wallet out.

82Z28

The z/28 hemi he is talking about is a prototype engine that Smokey Unick (not sure if thats spelled right) put together to see if it was worth trying to mass produce. If it is the one I'm thinking of it had semi-hemi canted-valve heads on it. I think they built 2 or 3 of them but deemed it not cost effective.
It was for trans-am racing, but as to how much horsepower or how many rpm it turned don't know.

1badlt

when my dad bought his 81 malibu the guy that sold it to us said its a dz302(67-69 z28 motor) so when got my hands on it i ran the bitch 9500 through all 4 gears wow
it was the most amazing feeling ever. my friends didnt beleive me so took them for a ride LOL u should seen there faces. we pulled out the motor back in sept. and found out that it was a plain old 350ci. LOL

fbody83

Haha how did you run a plain old 350 to 9500rpm???? Did it sound good at least?? lol

joewee350

on the plain 350 running to 9500 in all gears. It might be possible to turn it that high in first if you had 5.xx gears but without serious power it couldnt do it in all gears. I say it will exlpode around 7-7500rpm. Theres just no way a stock 350 will pull to 9500. Obviously the tach was messed up.

lt1camaro95

I have to call BS on that one. Valve float would destroy your valves at that speed and crappy 70's-80's quality motor would self implode and become a black hole.

1badlt

4.56 gears, w/24in tire
saginaw 4speed
2.02in/1.60ex **** *** gm cast heads
torker 2 intake
750cfm carb
563in lift cam 248 dur
stock bottom end

1badlt

oyeah solid lift cam

1badlt

as u can tell i have no mercy on cars
i treat every car asif it were a rental