Pictures of my motor swap in progress
08-14-2007, 10:41 PM
#1
Shirley Temple Drinker
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: IL
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Pictures of my motor swap in progress only about 2 hours into it so far...
And anyone know what these go to? they wern't plugged into anything..
And anyone know what these go to? they wern't plugged into anything..
08-15-2007, 10:33 PM
#5
Shirley Temple Drinker
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: IL
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Fresh lt1, stock short block, ported/polished heads, lunati cam ( don't have the specs on me, but its big ) and just about everything else stock besides exhaust and cai.
Trending Topics
12-02-2007, 02:21 PM
#17
Shirley Temple Drinker
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: IL
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Started to get the new motor together nicely
Built
Joeys dumb *** again
200 dollar lt's
Ready to go in, motors actually already on the k member but I didn't get a picture
Built
Joeys dumb *** again
200 dollar lt's
Ready to go in, motors actually already on the k member but I didn't get a picture
12-02-2007, 04:22 PM
#20
Shirley Temple Drinker
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: IL
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
My friend has had a 64 nova for the longest time, its in the back of his garage and this was the lt1 that was going in it, hince the choppy cam for the old school sound. when he heard I needed a motor he told me he'd put this one together and sell it to me for cheap, since he wanted to go turbo ls1 in the nova I think...
I unbolted everything really, left it all attached to the motor, and then unbolted the shock towers and six k member bolts and lift the car off of the k member with the motor still attached, then you use a engine hoist to remove the motor from the sub frame..
I unbolted everything really, left it all attached to the motor, and then unbolted the shock towers and six k member bolts and lift the car off of the k member with the motor still attached, then you use a engine hoist to remove the motor from the sub frame..