newbie mod mistakes
#281
hmm...mine doesnt do to bad hooking on street tires even with stall and headers...i mean granted it hooks better on the DR's..im gonna have to go back on my camera and find out what my best time is on the street tires N/A with lid/exhaust/stall...but im thinking it was like 7.90's....that was on 18-20PSI....we could go back and fourth like this forever...i like my TCI and you like your fuddle....i hope that ****** lasts you forever and i hope that you wish me the same kind of luck...if TCI is junk then i just hope i got one of the diamonds in the rough
#286
well, I had couple, here they are:
- going with three diffrent exhaust systems, from hooker to flowmaster 80 to TSP Rumbler cat back to finally TSP True Duals with Sweet Thunders
- installing 4.10 gear in stock 10 bolt and taking it to the track with my Nitto Drag Radials (guess what happend)
- Hypertech power programmer III
- SLP MAF, still sitting in my room, never installed it (btw should I install it, If I'll get it tuned right???)
- going with three diffrent exhaust systems, from hooker to flowmaster 80 to TSP Rumbler cat back to finally TSP True Duals with Sweet Thunders
- installing 4.10 gear in stock 10 bolt and taking it to the track with my Nitto Drag Radials (guess what happend)
- Hypertech power programmer III
- SLP MAF, still sitting in my room, never installed it (btw should I install it, If I'll get it tuned right???)
#287
Originally Posted by Zeke34
Since I'm here I might as well ask, how much are a set of O2 bugs goin' for?
John
#288
the guy i bought my 98 trans am from for $3250 had a completely stock setup. de-programmed the rev limiter. added a nitrous kit. im not 2 familiar with nitrious kits but there was 2 blue cylinoids. no secondary fuel line. 1 steel braided line running into the airbox above the air cleaner into a blue AN fitting and that was it. so im guessing it was just spraying unmetered nitrious into the motor. needless to say that if the crank wasnt in the motor i could stick my arm in oneside and out the other. about a 5" hole in # 1&2 wtf. but hey i got the car cheap and i got a shitton of extra parts. and im about to buy a 1998 camaro wrecked minor in the front left for the motor for $1500. but ill have z28 wheels new tranny good rear end. just needs a front clip.
- Scottie
ill post pics asap
- Scottie
ill post pics asap
#290
12 Second Club
iTrader: (2)
Joined: Sep 2006
Posts: 398
Likes: 0
From: Grande Prairie, AB. That's Canada you hoser.
Originally Posted by Judas
I'm with you on this one, paid $400can for lid and $500can for a MAS. My pro5.0 was a pos too, couldn't get it riped out of my car fast enough.
Hmmm that av sure looks familure...
#291
12 Second Club
iTrader: (2)
Joined: Sep 2006
Posts: 398
Likes: 0
From: Grande Prairie, AB. That's Canada you hoser.
[QUOTE=tuffluck]and hell, would it make any of you guys feel better if you knew i dumped about 4-5k worth of performance parts into a 1997 3.8 liter camaro? and only to run a best of 14.7!?!?! WHAT THE HELL WAS I ON, RIGHT?!?!?
I've seen in the Deals on Wheels flier a V6 camero for sale that did 10.8 at the track
4.1L block, forged everything and 250 or 300 shot of nos.
I've seen in the Deals on Wheels flier a V6 camero for sale that did 10.8 at the track
4.1L block, forged everything and 250 or 300 shot of nos.
#294
i have 2 tornado wind thingys in my car. best mod ive ever done. i think i gained 25+ hp, you guys need to sell your LT's and buy a few of these bad boys. i even put one in my I pipe (one bofore and one after the cat), i break the tires lose at 40 mph with half throttle.
lol. jk guys. i dont have my car yet but im sure i will screw up a long the way somewhere.
lol. jk guys. i dont have my car yet but im sure i will screw up a long the way somewhere.
#296
Bought a loudmouth right after I got the car. Then a year later got headers and ORY. I liked the sound with LM only, but its kind of annoying now with the drone while cruising. Would have done more research before buying my catback.
#299
Originally Posted by Rob98LS1
don't buy illegal exhaust parts for you car if you live in California... i hate changing out headers.
#300
Mine would have to be throwing the most aggressive cam I possibly could in there and still try to use it as a daily driver! Second would be purchasing MSD Coil Packs. A POS clutchmaster clutch that was more or less on or off, running straight pipes. The list probably goes on. Needless to say I ended up trading in my T/A for my vette and haven't touched it since besides the tune.