LS1BlackBird99

iTrader: (202)

Just picked up a 99 LS1 TA yesterday. It is bone stock and I have very little cash to spend right now but I want to do some small mods. What steps should I take?

co.6z28

iTrader: (1)

lid and air filter, cat back. thats how i started

SScreaminDemon

Nittany_marine

iTrader: (7)

Procharger D1sc with intercooler.......... j/k do what they said.

LS1BlackBird99

iTrader: (202)

Smooth Bellow worth anything? Any other free mods to do besides the TB bypass? I am just trying to get as much as I can for the least cost.

Nittany_marine

iTrader: (7)

Do a search for "free mods" and you will see what they are.

Tommy's dad

Free Ram Air

code4

iTrader: (30)

I did the free ram air mod first. Then I cut the factory muffler off and put an 18" bullet muffler before the axle. I did this myself so it was inexpensive. I loved the sound. That exhaust mod is called the "dynomouth".

here is the FRA mod how to
http://www.ls1camaro.net/sections.ph...ticle&artid=62

Different version of exhaust mod how to
http://www.ls1camaro.net/sections.ph...ticle&artid=72

8-Pack

Until you figure out exactly what you want to do with your exhaust I wouldnt get a catback. Get a cutout, under a hundred dollars installed and you can set off car alarms. Dont know exactly what your goals are but if you ever want to do anything more than a catback for your exhaust then you should hold off until you know for sure what your goals are.

35thls1ss19

iTrader: (1)

Def lid and air filter first, makes the engine bay look so much cleaner and then work on exhaust

y2k_ta

iTrader: (80)

Lid, Lid, Lid

Revelation222

Free Mods, Lid, cut-out

Then shifter/short stick if M6, or a Convertor if an auto when you get your first bit of cash.

2_wacko

iTrader: (2)

The best mods I did where the Lid and Cutout.

EvilTA

I would do exahust, like a borla , maybe if you could even find a used onein good shape. Save yourself some money.

Mike98WS6

iTrader: (5)

I would definately get a lid first. Well worth it IMO.

'02 SLP#686

iTrader: (1)

Absolute waste of time: Aftermarket MAFs!

LS1BlackBird99

iTrader: (202)

Thanks a ton for all the responses guys. I think that I will hold off on the exhaust for a while and do some true duals when I get the cash for pacesetters. I really do want some sound though!