ICEMAN 31

just got it this minute in the mail. can't wait to put it on but i need some help. Any website that can help me would be great. Also my 01 - 02 SLP air lid came with a snorkel looking thing thats on the left side i have no idea what thats for, and all the installation sites i been to, none of them show it. any help would be great

DoubleTapDrew

iTrader: (1)

Here's a how-to

I got a new grommet and IAT sensor. It was like $10.
That big hole on the side is for a sensor or something that the 00-02 cars have. My SLP lid came with a plug for that hole since mine's a 98.

after dark

iTrader: (5)

I just got mine yesterday...There are directions in the box...

Magnet

iTrader: (36)

don't worry its cake...no big problem...you'll like it

ICEMAN 31

thanks guys, but i am not talking about the IAT whole i mean the snorkel looking thing on the right of the lid

here is a pic

http://www.ws6project.com/user_stor/...c6a4e59b4d8d73

2001NBMZ28

My whisper lid I bought back in '01 didn't come with that - no hole either - just put a filter on the end of the air hose. Did it come with a plug for the hole in the lid? If so use it and get a filter, if not your choices are to connect the air hose, or find something like an expansion plug for the hole - and still use a filter.

ICEMAN 31

no, no plug for the whole, i am confused at what the purpose of this tube is for

NOZR1

iTrader: (5)

AIR pump.

ICEMAN 31

please explain, (talk to me like a 10 year old) sorry i am definition of newbie

desertLS1

iTrader: (8)

what year is your car? if you have an 01-02 car then theres another hose that connects to the SLP hose! fits like a glove! if its not then just ignore the hose b/c you orderd the wrong lid, and just plug it with a grommet.

SweeTbone

iTrader: (8)

Just leave it hooked up to your lid unless you decide to delete your A.I.R. pump. It's down behind the drivers side headlight and pumps air coming from your lid to your exhaust manifolds. No biggie leaving it attached. If you decide to delete, put a plug or grommet there to seal up the hole and lose the pump and all the tubing.

quik01ss

iTrader: (24)

If you have an 00-02 ls1 there has got to be a hose on your drivers side look for it because when I bought my 01 ss they had a g2 air lid on it for a 98 99 ls1..... so they pushed the hose down ...but I bought an slp lid and put the air hose back.

ICEMAN 31

thanks for all the help guys, the car is in the dealer getting the headlight motor replaced (i love warrenties) so when i get it bacj soon I will atckle these problems