Lowering an SS...
#1
Lowering an SS...
I have a 99 ss camaro (read Mods below). with the few mods that I have, how much can I lower the car and not have to worry a whole lot about scrapping the ground over bumps and such? also how much should the springs cost and what brand?
thanks in advance!
joe
P.S. I also don't wanna loose any, or much, of my traction abilities. will i need LCA relocation brackets after this too?
thanks in advance!
joe
P.S. I also don't wanna loose any, or much, of my traction abilities. will i need LCA relocation brackets after this too?
#2
On The Tree
Join Date: Mar 2007
Location: Oceanside, CA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
I can't speak about other brands of springs, but with my Hotchkis springs the front air dam scrapes, and custom y-pipe scraped. I had to have the pipe redone.
You just gotta be careful and take it slow, hit speed bumps at angles, etc. Definitely make sure your y-pipe is tucked up to provide clearance, but not so much it bangs on the floor board.
You just gotta be careful and take it slow, hit speed bumps at angles, etc. Definitely make sure your y-pipe is tucked up to provide clearance, but not so much it bangs on the floor board.
#5
On The Tree
Join Date: Mar 2007
Location: Oceanside, CA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slowjoe99
how much did those springs lower your car?
#6
TECH Veteran
iTrader: (9)
i lowered mine with eibach prokit springs and got shocks from sam strano . . . it all lowered my car more than an inch! i don't scrape my SLP y-pipe, but the LM resonator scrapes over all speed bumbs. like they said though, you'll have to go over speed bumps at angles regardless. trust me, your car will look better!
#7
Teching In
Join Date: May 2005
Location: Birmingham, AL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I have the Eibach Sportline kit on my 99 SS with pacesetter longtubes and it scrapes all the time. So dont get the sportlines, but my buddy has the Eibach prokit on his and it never scrapes.
Trending Topics
#10
Teching In
Join Date: Dec 2002
Location: Davie, Fl., USA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Mines
a Pain in the REAR!! I should have left it alone. it rides like a brick and forget putting anybody in the back. Gave my orignal springs away. Wish I had kept because I would have put them back in.
#11
TECH Senior Member
Originally Posted by fredl11
a Pain in the REAR!! I should have left it alone. it rides like a brick and forget putting anybody in the back. Gave my orignal springs away. Wish I had kept because I would have put them back in.
#16
TECH Senior Member
Originally Posted by slowjoe99
what kind of shocks should I get if I get the eibach prokit springs that lower my car 1 - 1 1/2 inches?
#18
TECH Senior Member
Originally Posted by slowjoe99
I went to the bilstein website and could not find the HD's. I just want to know how much they cost and where to get them the cheapest. any help appreciated. thanks
Last edited by JD_AMG; 08-03-2007 at 07:09 PM.
#19
TECH Addict
iTrader: (12)
Originally Posted by slowjoe99
I went to the bilstein website and could not find the HD's. I just want to know how much they cost and where to get them the cheapest. any help appreciated. thanks