shreveport/bossier hang out!
06-17-2009, 07:30 PM
#4404
TECH Regular
iTrader: (29)
Join Date: Oct 2007
Location: Bossier, LA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
I have some stuff from the hot rod I'm wanting to get rid of. Just thought I would check with the local crowd to see if any you guys need any of this stuff.
Edelbrock stepped headers with an SLP Y-pipe: $175.00
Custom made, 3" back over the axle stepped to 3 1/2", single exhaust, with single chamber Flowmaster muffler: Asking $250.00 or $400.00 for the whole exhaust with the headers and Y-pipe
Moser Ford 9" rear end, narrowed 1" per side, 31 spline axles, spool, rear brakes and rotors, welded on LCA relocation brackets, torque arm bracket, adjustable panhard rod, drain plug, welded on sway bar brackets, and longer 1/2" ARP will studs. I'm keeping the the center section and gear. The spool goes with this, but you will need to buy a center section and gear: Asking $1100.00
BMR Extreme torque arm, powder coated red, this has already been cut and installed on to BMR boxed subframe connectors, so it would weld right in if you already have a set: Asking $375
Weld Pro Stars, 15x10 with 6.5" backspacing, with some 315/60/15 MT drag radials on them, tires aren't much good, these wheels and tires fit perfect on the above rearend: Asking $300.00
I will do a package deal on the rear end, torque arm, and wheels for $1650.00
If any intrest let me know and I get some pics out. The whole exhaust is off the car, the rear end is still under the car. Should be out by next weekend. If you have any questions, give me a call: (318) 364-6254 Thanks!
-Coleman
I have some stuff from the hot rod I'm wanting to get rid of. Just thought I would check with the local crowd to see if any you guys need any of this stuff.
Edelbrock stepped headers with an SLP Y-pipe: $175.00
Custom made, 3" back over the axle stepped to 3 1/2", single exhaust, with single chamber Flowmaster muffler: Asking $250.00 or $400.00 for the whole exhaust with the headers and Y-pipe
Moser Ford 9" rear end, narrowed 1" per side, 31 spline axles, spool, rear brakes and rotors, welded on LCA relocation brackets, torque arm bracket, adjustable panhard rod, drain plug, welded on sway bar brackets, and longer 1/2" ARP will studs. I'm keeping the the center section and gear. The spool goes with this, but you will need to buy a center section and gear: Asking $1100.00
BMR Extreme torque arm, powder coated red, this has already been cut and installed on to BMR boxed subframe connectors, so it would weld right in if you already have a set: Asking $375
Weld Pro Stars, 15x10 with 6.5" backspacing, with some 315/60/15 MT drag radials on them, tires aren't much good, these wheels and tires fit perfect on the above rearend: Asking $300.00
I will do a package deal on the rear end, torque arm, and wheels for $1650.00
If any intrest let me know and I get some pics out. The whole exhaust is off the car, the rear end is still under the car. Should be out by next weekend. If you have any questions, give me a call: (318) 364-6254 Thanks!
-Coleman
