shreveport/bossier hang out!
11 Second Club
iTrader: (1)
Join Date: Sep 2010
Location: Oceanside, CA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The cop pulled me over since I didn't race off with them. the srt4 came back down hwy1 and the cop turned around and stopped him and I drove back home. Just finished talking to the srt4 guy and he got off easy. The cop asked him if he was racing and he said "No i drive a neon" and then did the follow the finger test because he had his lights off and thought he was drunk lol. Should have done that deeper in HWY 1. started too early
11 Second Club
iTrader: (29)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Why is it when yall do something illegal and get caught yall think of me ![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
I know yall are kidding around but I do feel a little hurt that I wasn't asked where a good spot would be
Surely yall dont think I TnT at the track or in my driveway do you?
Not only that I was half lit by 1030 curled up in the fetal position by midnight lol
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
I know yall are kidding around but I do feel a little hurt that I wasn't asked where a good spot would be
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
Not only that I was half lit by 1030 curled up in the fetal position by midnight lol
Last edited by blue98Z; 09-03-2011 at 09:01 AM.
11 Second Club
iTrader: (9)
Join Date: Oct 2010
Location: Louisiana
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
11 Second Club
iTrader: (29)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ellerbe road by the DeSoto/Caddo line, but dont yall waller my hole out too much. That's where I do my TnT. It's easy to get there. Hwy 1 south then turn onto 175 and go to the flashing light at the 4 way. Turn right and go maybe 1/4 mile and be amazed the long, dark, straight, nicely paved road that will lay before you hahahaha.
I use it cause I can duck off back in my parish real quick if I need to
I very seldom use it though. My car hasn't changed in awhile obviously.
I use it cause I can duck off back in my parish real quick if I need to
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
11 Second Club
iTrader: (9)
Join Date: Oct 2010
Location: Louisiana
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I talked to a guy that built FLT's and he said my stage 4 trans could handle 7200 rpm!! **** YEA!
here is the post,
And this from a pm!
Not sure if you know this but I use to build for them. When was your trans built? They do use the spring I mentioned in the thread btw
![The Patriot !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_patriot.gif)
The same as any other....until it breaks! Seriously now I have seen guys turn these pumps into the 7k range and not have issues. I would recommend if turning one of these pumps that fast that you install a high rev pump slide spring and also a billet pump rotor. Im pretty sure that most of the sponsors here use the pump slide spring and the billet rotors are available from a few here. HTH Vince
Not sure if you know this but I use to build for them. When was your trans built? They do use the spring I mentioned in the thread btw
TECH Enthusiast
iTrader: (1)
Join Date: Feb 2009
Location: Shreveport La
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Josh. We should hook up out there one night. I know your paint is still fresh and soft and I wouldn't want to blow it off. Once this rain stops we can do some a4 vs m6 grudge racing on the skreet. Lol
TECH Resident
iTrader: (22)
Join Date: Oct 2006
Location: Shreveport, Louisiana
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, I disassembled the LS2 shortblock today that I bought this week.
It seems that the cam bearing(s) pushed forward, from everything I'm reading.