my first nitrous pass
Thread Starter
12 Second Club
Joined: Mar 2009
Posts: 196
Likes: 0
From: deer park (houston area)
my first nitrous pass So I went to the track last night for my first nitrous pass, and it was awesome! my car was running 13.2 consistently before the 100 wet shot was added and I ran a 12.57 last night... I’m sure I could of made a couple 10ths faster because my 60 ft was horrible but I was only able to make one pass because I’m sure that I broke my fly wheel, or my converter? But besides that I was pleased, and had a blast now all I can think about is either doing it again, or just going faster! My car is a 97 camaro lt1 and the mods are
4.10 gears
Hooker long tube headers
Magna flow cat back
w/ ORY
Torque arm
Sub frame’s
100 wet shot
With a tune..
hear is the video
http://www.youtube.com/watch?v=5VSNDrZnRPw
4.10 gears
Hooker long tube headers
Magna flow cat back
w/ ORY
Torque arm
Sub frame’s
100 wet shot
With a tune..
hear is the video
http://www.youtube.com/watch?v=5VSNDrZnRPw
12.57 at like what 116mph. what were you on street tires or drag radials by the looks it was a street tire..get a damn slick on there and you easily see 11.3x with the right 60ft and a solid pass...btw what kit is it that you have
Thread Starter
12 Second Club
Joined: Mar 2009
Posts: 196
Likes: 0
From: deer park (houston area)
Yea those are my only mods lol, and I thought my cars flex plat, or converter had broken on that pass? well this is kind of embarrassing because today I found out that the horrible noise was just my cutout... the wing nuts had came loose and it was opening and closing as the exhaust pusht it open lol.. What a relief!
yea but i was making better 60 ft times befor the nitrous...
ohh and this was my times
.528
1.93
5.34
8.14
88.88
10.55
12.57
110.14
ohh and id have to say THANK YOU nitro dave!! at nirous outlet
yea but i was making better 60 ft times befor the nitrous...
ohh and this was my times
.528
1.93
5.34
8.14
88.88
10.55
12.57
110.14
ohh and id have to say THANK YOU nitro dave!! at nirous outlet
Last edited by allenwesley; May 23, 2009 at 11:24 PM.
what the hell is your point. don't troll threads moron. im glad you run that fast, i coast faster than you. next!!!!
anyways to the op, nice number, get those 60fts down and get a cam. time to go big or go home right? lol
anyways to the op, nice number, get those 60fts down and get a cam. time to go big or go home right? lol
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Yea those are my only mods lol, and I thought my cars flex plat, or converter had broken on that pass? well this is kind of embarrassing because today I found out that the horrible noise was just my cutout... the wing nuts had came loose and it was opening and closing as the exhaust pusht it open lol.. What a relief!
yea but i was making better 60 ft times befor the nitrous...
ohh and this was my times
.528
1.93
5.34
8.14
88.88
10.55
12.57
110.14
ohh and id have to say THANK YOU nitro dave!! at nirous outlet
yea but i was making better 60 ft times befor the nitrous...
ohh and this was my times
.528
1.93
5.34
8.14
88.88
10.55
12.57
110.14
ohh and id have to say THANK YOU nitro dave!! at nirous outlet
. Lets see some 1.6's and 11's will be very easily had!! Flash the converter and spray that bitch outta the hole. 