Getting There.... Finally in the 9's
#23
Race your car!
iTrader: (50)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not too bad, congrats on getting it going, you've been working on it for a while now and it's got to feel good that you've got it hitting the mark first day out with the new setup ![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Definately plenty left in it from the video, just a good clean run will probably knock 2 tenths off I bet.
Get the tune strait, raceweight down to about 3000 and you'll be quite happy with the results I'm sure.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Definately plenty left in it from the video, just a good clean run will probably knock 2 tenths off I bet.
Get the tune strait, raceweight down to about 3000 and you'll be quite happy with the results I'm sure.
#24
TECH Resident
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That thing leaves like a monster on the spray. But yea im sure if you bring the shocks back down you should be just fine with everything coming in off the line. Getting a lot out of a little.
#25
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not too bad, congrats on getting it going, you've been working on it for a while now and it's got to feel good that you've got it hitting the mark first day out with the new setup ![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Definately plenty left in it from the video, just a good clean run will probably knock 2 tenths off I bet.
Get the tune strait, raceweight down to about 3000 and you'll be quite happy with the results I'm sure.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Definately plenty left in it from the video, just a good clean run will probably knock 2 tenths off I bet.
Get the tune strait, raceweight down to about 3000 and you'll be quite happy with the results I'm sure.
#26
Race your car!
iTrader: (50)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Believe me I hear ya. Drag brakes (full set with redoing the lines, and going to a manual master) saved me 100 lbs last year, so that's a good start. lexan front and rear is like another 80, that's sitting here waiting to go on.
But, I have alot of stuff I'm gonna be doing when I get started... expect a build thread
But, I have alot of stuff I'm gonna be doing when I get started... expect a build thread
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#28
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOL He was pissed that they lined him up next to me. Typical stuff we deal with up here though. I always expect them to double click the lights on me. Then I trip the first beam, hit the data logger, and take my time getting into the second beam. Usually, they get mad because as soon as they stage, they start revving for their launch.
#30
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks Robert. The Big Stuff 3 is awesome. It is absolutely more user friendly than efi live. Once you spend a couple hours familiarizing yourself with the software, it is actually easy to dial in a basic tune. I haven't gotten into the more advanced portions of injector phasing and stuff like that. I'm going to let RPM dial that in when I get down south this winter
#37
10 Second Club
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Jeremy.... looks good.
Just to give you something to think about.
My car went out on the 700hp tune and hit the bumper.... tightened up the shocks and went a 6.23 @110 with a 1.38...... not hitting it that hard.
It did go 1.32 on the bumper... but that is no way to go down the track.
1 stage on the plate with two 52 pills. Makes +280 hp with the nitrous.
I am thinking it will run a 6.10 at 111mph...... so you are gettin it done man!![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
![The Pimp](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_pimp.gif)
That front end is way to loose.... tighten it up. Also.. what rear sway bar is on the car?
Just to give you something to think about.
My car went out on the 700hp tune and hit the bumper.... tightened up the shocks and went a 6.23 @110 with a 1.38...... not hitting it that hard.
It did go 1.32 on the bumper... but that is no way to go down the track.
1 stage on the plate with two 52 pills. Makes +280 hp with the nitrous.
I am thinking it will run a 6.10 at 111mph...... so you are gettin it done man!
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
![The Pimp](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_pimp.gif)
That front end is way to loose.... tighten it up. Also.. what rear sway bar is on the car?
#39
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Jeremy.... looks good.
Just to give you something to think about.
My car went out on the 700hp tune and hit the bumper.... tightened up the shocks and went a 6.23 @110 with a 1.38...... not hitting it that hard.
It did go 1.32 on the bumper... but that is no way to go down the track.
1 stage on the plate with two 52 pills. Makes +280 hp with the nitrous.
I am thinking it will run a 6.10 at 111mph...... so you are gettin it done man!![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
![The Pimp](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_pimp.gif)
That front end is way to loose.... tighten it up. Also.. what rear sway bar is on the car?
Just to give you something to think about.
My car went out on the 700hp tune and hit the bumper.... tightened up the shocks and went a 6.23 @110 with a 1.38...... not hitting it that hard.
It did go 1.32 on the bumper... but that is no way to go down the track.
1 stage on the plate with two 52 pills. Makes +280 hp with the nitrous.
I am thinking it will run a 6.10 at 111mph...... so you are gettin it done man!
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
![The Pimp](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_pimp.gif)
That front end is way to loose.... tighten it up. Also.. what rear sway bar is on the car?
I'm going to have to hit you guys up when I visit my folks in Lewisville. They live like 5 minutes from RPM. Maybe I'll have to bring the car down. Are Kennedale or Denton open in mid to late November?