Official Stock Cube Nitrous List
Thread Starter
9 Second Club
iTrader: (21)
Joined: Apr 2006
Posts: 3,240
Likes: 1
From: sacramento, CA
Went out again this weekend and did a little better, enough to move up a few spots.
10.40 @ 128.7 - 1.43 - 150shot - 04/10/11 - Second_2_None - Cam/Nitrous--SS post #102
10.40 @ 128.7 - 1.43 - 150shot - 04/10/11 - Second_2_None - Cam/Nitrous--SS post #102
Last edited by second_2_none; Apr 14, 2011 at 09:41 PM.
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
some good stuff running right now. good times.
ive been cruzing my car on the street a bit, doing a few local shows etc. still to hot for me to race. maybe a couple weeks.
ive been cruzing my car on the street a bit, doing a few local shows etc. still to hot for me to race. maybe a couple weeks.
Went out yesterday and went a little faster. Still has a little more in it also. But for now here are my stats, enough to move up 10 slots I believe 
10.20@132.59 - 1.49' - 200 shot - 9/2/2011 - second_2_none - Cam/Nitrous - SS
Post #106
10.20@132.59 - 1.49' - 200 shot - 9/2/2011 - second_2_none - Cam/Nitrous - SS
Post #106
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Great job man, east cost and sbe handling business!!!!!
No dout 
Thanks man! Def not on your level but I have been learning a lot from you, camscam, and JL!
I have the vids in the dragracing tech section, check them out when you get time.
Thanks man! Def not on your level but I have been learning a lot from you, camscam, and JL!I have the vids in the dragracing tech section, check them out when you get time.
Last edited by second_2_none; Sep 4, 2011 at 04:34 PM.
Teching In
Joined: Jun 2010
Posts: 34
Likes: 0
From: Chatom, ALABAMA
Camscam how much money would I be Lookin to spend to get my bottom end built and heads cam and nitrous?? U tell me the best sset up and I'll go with that ! Part for part! I would greatly appreciate ur time!
I'll tell you what's the best of everything. What's in my motor....bottom end, heads, AND nitrous. Just look at the top of this list. lol j/k And that was just breaking it in on the 150 shot. Probably going up for sale soon. Intake to oil pan. I wanna take it down the 1/4 at least once on the 250 with the break-in oil out of it to see what it will really do. After that, I think the motor's coming out, the cam will be removed, and the entire set-up (minus the cam) will be sold. Awesome set-up, but it's just about time to go faster. Time to play with the big boys on the little tires.
I might take it to Dallas in a week or two and let it run out the back door with the 250 shot. The problem is I just went to slicks and am having to start over with getting my 60's back down to where they were with the radials. I'd rather work on them for a while before making the trip to a 1/4 mile track.
