need microedge harness
Trending Topics
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
graham, you seem to be helpful for a lot of people, i will be sure to give you all business. i agree with redvert theres not anything else i have seen that has had all in one controller like microedge. as for lean shutdown,wot switch,window switch,nitrous delay, and progressive which on my setup, i dont use progressive. if there was something else like that from another rep, i would do away with HSW.
#14
Guest
Posts: n/a
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
graham, you seem to be helpful for a lot of people, i will be sure to give you all business. i agree with redvert theres not anything else i have seen that has had all in one controller like microedge. as for lean shutdown,wot switch,window switch,nitrous delay, and progressive which on my setup, i dont use progressive. if there was something else like that from another rep, i would do away with HSW.
Thanks for the props. I like doing a lot of tech. Sale's call bore me to death.
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#15
TECH Enthusiast
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm working towards spraying a dry direct port. Their maf interface makes the injectors add fuel so I don't have to run separate solenoids. I also intend to eventually run alcohol with a fuel composition sensor in the return line. I'd like to be able to do this without an independent fuel system. If you guys offered something that could do this and match the other functions of the interface I would have been interested.
I'm sorry you misunderstood, I was talking about the interface, not the microedge, different product. There are in fact products out there that do everything the microedge does and more. The Trick performance gauge (discontinued), the NX octane gauge and controller combo and the holley launcher are just a few I can think of off the top of my head. Personally I'd take the holley launcher launcher over the interface any day.
MAP based ramping and 12 step progressive FTW.
http://www.holley.com/15977NOS.asp
More detailed info:
http://www.holley.com/data/Products/.../199R10466.pdf
Imagine having this badass display on your carputer:
graham, you seem to be helpful for a lot of people, i will be sure to give you all business. i agree with redvert theres not anything else i have seen that has had all in one controller like microedge. as for lean shutdown,wot switch,window switch,nitrous delay, and progressive which on my setup, i dont use progressive. if there was something else like that from another rep, i would do away with HSW.
MAP based ramping and 12 step progressive FTW.
http://www.holley.com/15977NOS.asp
More detailed info:
http://www.holley.com/data/Products/.../199R10466.pdf
Imagine having this badass display on your carputer:
![](http://i392.photobucket.com/albums/pp8/BradZ01/noslauncher.png?t=1311843336)
Last edited by RedVertTA; 07-28-2011 at 04:01 AM.
#16
Guest
Posts: n/a
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm working towards spraying a dry direct port. Their maf interface makes the injectors add fuel so I don't have to run separate solenoids. I also intend to eventually run alcohol with a fuel composition sensor in the return line. I'd like to be able to do this without an independent fuel system. If you guys offered something that could do this and match the other functions of the interface I would have been interested.
#17
TECH Enthusiast
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not sure I understand your question. Why spray dry? Because I only need half the parts, that makes the system more affordable (yes I factored in the cost of the interface), gives my engine bay a cleaner look and provides less work for me down the road (won't have to change fuel jets, just flip a switch on the interface so the injectors add more fuel).
What does this have to do with e85? In a flexfuel setup where the ratio of alcohol and gas is constantly changing, the engine can adapt different air/fuel rations with fuel composition sensor. The same cannot be said for fuel jets, they remain the same and cannot adjust to change air/fuel ratio. I shouldn't have to explain that this is bad. At this point the only options I see to make this work are to either install an independent fuel system or to install the interface. The interface is the cleaner, less work involved and less costly of the two.
What does this have to do with e85? In a flexfuel setup where the ratio of alcohol and gas is constantly changing, the engine can adapt different air/fuel rations with fuel composition sensor. The same cannot be said for fuel jets, they remain the same and cannot adjust to change air/fuel ratio. I shouldn't have to explain that this is bad. At this point the only options I see to make this work are to either install an independent fuel system or to install the interface. The interface is the cleaner, less work involved and less costly of the two.
#18
Guest
Posts: n/a
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not sure I understand your question. Why spray dry? Because I only need half the parts, that makes the system more affordable (yes I factored in the cost of the interface), gives my engine bay a cleaner look and provides less work for me down the road (won't have to change fuel jets, just flip a switch on the interface so the injectors add more fuel).
What does this have to do with e85? In a flexfuel setup where the ratio of alcohol and gas is constantly changing, the engine can adapt different air/fuel rations with fuel composition sensor. The same cannot be said for fuel jets, they remain the same and cannot adjust to change air/fuel ratio. I shouldn't have to explain that this is bad. At this point the only options I see to make this work are to either install an independent fuel system or to install the interface. The interface is the cleaner, less work involved and less costly of the two.
What does this have to do with e85? In a flexfuel setup where the ratio of alcohol and gas is constantly changing, the engine can adapt different air/fuel rations with fuel composition sensor. The same cannot be said for fuel jets, they remain the same and cannot adjust to change air/fuel ratio. I shouldn't have to explain that this is bad. At this point the only options I see to make this work are to either install an independent fuel system or to install the interface. The interface is the cleaner, less work involved and less costly of the two.
Have you ever ran a direct port before? Tuned a nitrous car on e85?
What does your car make on motor?
Again just curious, always interested in other peoples opinions.
#19
TECH Enthusiast
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am aware of how it works. I was looking for your reasoning to taking the road less traveled.
Have you ever ran a direct port before? Tuned a nitrous car on e85?
What does your car make on motor?
Again just curious, always interested in other peoples opinions.
Have you ever ran a direct port before? Tuned a nitrous car on e85?
What does your car make on motor?
Again just curious, always interested in other peoples opinions.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Like I said I'm still working towards it. It will be a long time before I'm able to make this happen (Assuming this silly dream actually comes to fruition). I have a lot of work ahead and there are lots of parts I have yet to acquire. The end goal is around 450 motor, with about a 200 shot and room to grow. Yes this is all extremely unconventional, I know, I could probably achieve this with a simple wet or plate kit like everyone else. I just like the idea of added safety with the direct port. I also have yet to see someone with a system like this, isn't part of the spirit of hot rodding to be different?
BTW sorry everyone for jacking the thread.