NON-projected Tip Spark Plugs??
Thread Starter
10 Second Club
iTrader: (11)
Joined: Apr 2009
Posts: 2,283
Likes: 1
From: Lake of the Ozarks, MO
NON-projected Tip Spark Plugs?? Im going to step my shot up to a 175 and my tuner suggested a Non Projected Plug? Stock Bottom End, Cam, 255 pump.. I thought Id ask around and see what everyone thought about them. Also what would be the part number if anyone knows..
Thanks
Joey
Thanks
Joey
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Agreed, .025" is too tight! .035-.040" would be preferred!
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
I have my br7ef plugs gapped at .032. They have been in my car for 5k and I have yet to foul one. I do alot of stop and go traffic and with the ms3 cam, so its not your ordinary stop and go. I have a good 5+ bottles through them as well. I am going to change them real soon anyways to new br7ef's.
Guest
Posts: n/a
I have my br7ef plugs gapped at .032. They have been in my car for 5k and I have yet to foul one. I do alot of stop and go traffic and with the ms3 cam, so its not your ordinary stop and go. I have a good 5+ bottles through them as well. I am going to change them real soon anyways to new br7ef's.
for the first few bottles I put through the car, I changed them after every bottle. I was putting new plugs in it every other week. Always checking them after a run to see how they were burning etc. After all that, I stopped doing it and have yet to foul one. I thought I was on the rich side, but I guess not. Im only running 21* of timing too.
Guest
Posts: n/a
for the first few bottles I put through the car, I changed them after every bottle. I was putting new plugs in it every other week. Always checking them after a run to see how they were burning etc. After all that, I stopped doing it and have yet to foul one. I thought I was on the rich side, but I guess not. Im only running 21* of timing too.
Staging Lane
Joined: Apr 2009
Posts: 82
Likes: 0
From: Seguin/San Antonio Tx.
i run them on my car with no adverse reactions whatsoever had the in for 5,000 miles and about 4 bottles. Also put them in a buddies lt1 that i did the nitrous install on, he has had no problems either.
