Mother bottle mount done
Mother bottle mount done i decided to start filling my own bottles. went and picked up a 56# bottle last week. but since i really dont feel like flipping bottles and buying one of the christmas tree looking stands, i wanted to make my own.
figured i'd post it up since i haven't seen anything like it before and i think its pretty convenient.
here it is once mounted.
here it is upside down
this is how it spins.
and here is the bolt
material needed
6x6x1/2 plate(5/8 is shown because thats what was around)
3" sch80 black pipe 4" long (seamless is better)
2 1/2" sch40 black pipe 5"
5/16 or 3/8 tap and bolt
8" riser clamp for black pipe
(2) 5/8 bolt 5" long with nuts
figured i'd post it up since i haven't seen anything like it before and i think its pretty convenient.
here it is once mounted.
here it is upside down
this is how it spins.
and here is the bolt
material needed
6x6x1/2 plate(5/8 is shown because thats what was around)
3" sch80 black pipe 4" long (seamless is better)
2 1/2" sch40 black pipe 5"
5/16 or 3/8 tap and bolt
8" riser clamp for black pipe
(2) 5/8 bolt 5" long with nuts
Launching!
Joined: Oct 2012
Posts: 219
Likes: 0
From: near Beech Bend race way
Diy nos fill These r cool i have one shop n town that fills tanks and im starting to think they may close the door n the near future, though bout trying to do this , not sure but iheard the guy that fills mine say that u can never empty ur main tank , like to learn more, i'll do a search, but ur imput would be help full
Trending Topics
I don't even freeze mine. I have a heater I point at the mother bottle and let it get warm, hook up the small one and open the valves. Shoots right up to around 20-22lbs then I leave it go for a few minuted and it slowly tops off to 24-25 without issue. I thought about vacuuming down a completely empty bottle before hooking it up but so far I haven't needed to.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Siphon tube bottles work, but you'll get more out of the mother cylinder not using a siphon tube and inverting the cylinder. The orientation of the siphon tube does not allow you to get all the nitrous out.
I freeze fill. Read one too many horror stories on heating the mother bottle.
I freeze fill. Read one too many horror stories on heating the mother bottle.
Siphon tube bottles work, but you'll get more out of the mother cylinder not using a siphon tube and inverting the cylinder. The orientation of the siphon tube does not allow you to get all the nitrous out.
I freeze fill. Read one too many horror stories on heating the mother bottle.
I freeze fill. Read one too many horror stories on heating the mother bottle.
