Wicked 94TA

iTrader: (5)

I'm thinking about getting the NOS plate that goes behind my throttle body instead of using the fogger nozzles in the side of my intake bellow. I have a 80 or 85mm throttle body (not sure the size, it came with my intake when I got it.)
Will the NOS throttle body plate work with my throttle body?

LPTXZ28

iTrader: (18)

It will with the 80 but not the 85. I am using it on my 85 but opened it up to fit

Wicked 94TA

iTrader: (5)

Sweet that's what I was wondering. I figured I could just open it up a bit worse comes to worse. I wonder what would be the best way to identify which TB I have?

NitrousExpress

iTrader: (4)

Theoretically, a plate, like ours which is 78 mm, not sure about NOS's, would work on there, but it would be best to either swap to a stock TB, or at least port match the plate so that it is a smooth transition between the plate and the TB.

-Garrett

brandon@nitrousoutlet

iTrader: (2)

Can you post a picture of the throttle body you have? If its an 85 I'm thinking the throttle body blade will hit the plate when it tries to open.

Wicked 94TA

iTrader: (5)

Here's the best pic I have of it right now. I'll have to take a better pic of it tomorrow with the air intake off. I searched around and I'm sure its a Summit one. I just don't know how to tell if its a 80 or 85mm.

brandon6.0

iTrader: (32)

Measure the inside diameter

Wicked 94TA

iTrader: (5)

I've got a set of calipers, would those be the best thing to use? I'm assuming the way to get the best measurement would be to take the TB off and measure it from the back?

LPTXZ28

iTrader: (18)

Take off the air intake and look inside the throttle body. The BBK intake is 85mm so it will either be smooth matching up with the intake or have a lip behind the throttle body where it opens up to the intake.

Wicked 94TA

iTrader: (5)

I checked it today and its a smooth transition so it looks like I have an 85mm. Thanks for the suggestion.