Directport Time!!!!
10-21-2005, 12:25 PM
#48
10 Second Club
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nitro Dave's Nitrous Outlet
There is nothing there to see...
I want some spray so bad, I just got to save up some $$$
10-24-2005, 09:44 PM
#50
TECH Regular
iTrader: (3)
Join Date: Nov 2001
Location: South,Alabama
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Eugenio_SS
The big rails (the smaller rail is the normal fuel-rail) are actally two tubes in there... 1 for nitrous (top one) and 1 for fuel (bottom one)
you can actually see from the front that the fuel solenoids are using the bottom holes.
also notice that the nitrous feeding to each cylinder is placed higher than the fuel one since they are connected to a different tube inside the rail.
The big tube w/ red fittings in the front that does a complete circle goes to the regular fuel rail to feed fuel into the DP system... if one were to have an independant fuel system, one would not plug it there, but would directly on the regulator from the cell.
hope this helps visualising it.
you can actually see from the front that the fuel solenoids are using the bottom holes.
also notice that the nitrous feeding to each cylinder is placed higher than the fuel one since they are connected to a different tube inside the rail.
The big tube w/ red fittings in the front that does a complete circle goes to the regular fuel rail to feed fuel into the DP system... if one were to have an independant fuel system, one would not plug it there, but would directly on the regulator from the cell.
hope this helps visualising it.
What would you do if you were using a return feed line to the tank with a aeromotive regulator by the intake?
11-03-2005, 09:22 AM
#57
Originally Posted by Black X
Dave I already have NX part#20920 and i have aeromotive rails, what would it cost for a conversion to this setup???
I don't need bottle or Solenoids?
I don't need bottle or Solenoids?
I looked at the picture but I guess it did not register. I thought you were asking about the money maker.Sorry.
The 20920 kit will not work on this intake set up. The solenoids on the directport are larger and flow more. It would be cheaper for you to sell your system and start over.
Dave
Last edited by Nitro Dave's Nitrous Outlet; 11-04-2005 at 10:18 AM.